Plastic model that requires assembly and painting
Adhesive, tools, paint, etc. are required separately.

1/32 scale unpainted plastic assembly kit
Completed size: total length 475mm, total width 296mm
Product introduction [The U.S. Air Force's masterpiece fighter] The U.S. Air Force's F-16 was born as a small and lightweight air combat fighter, and through an excellent basic design and gradual improvements, it evolved into a powerful multi-purpose fighter. is
The advanced F-16C has improvements to the radar and cockpit, and can now be equipped with the high-powered GE F110 engine in addition to the P&W F100 engine.
Among them, the Block 50, which began delivery in 1991, is equipped with an F110-GE-129 engine with further improved thrust.
Furthermore, the type equipped with the ability to operate the AGM-88 anti-radar missile is called the F-16CJ, and can also perform the Wild Weasel mission to suppress enemy air defense radars.
More than 4,000 F-16s were produced, including variants, making it the most successful and masterpiece fighter of modern times.
[Model details] This is a plastic model assembly kit of the U.S. Air Force's multi-role fighter F-16CJ.
★Scale 1/32, total length 475mm, total width 296mm
★The blended wing body that creates the beautiful form of the F-16 is expressed by molding the upper surface of the main wing in one part with the fuselage.
★Screws are used for main parts of the aircraft.
In addition, the pillars are made of die-cast material to ensure strength.
★Precisely modeled the F110-GE-129 engine that characterizes Block 50
Even after completion, it can be attached and detached using the slide rail at the top of the engine bay just like the actual machine.
A trolley for mounting the engine is also included, so you can enjoy displaying it alone or creating scenes for maintenance scenes.
★A rich set of weapons such as missiles
Two types of additional tanks and AN/ALQ-184 ECM pods are also included, allowing you to reproduce the weapons loading pattern currently commonly seen on F-16CJs belonging to the U.S. Air Force.
The weapons can be removed and replaced by using polycap fasteners, allowing you to enjoy the differences in weapons for each mission in one aircraft.
★The pitot tube in the nose and the discharge cables at the rear end of each wing are made of metal, and the radar antenna surface and chaff/flare dispenser are made of photo-etching to improve strength and texture.
★ Moving blades such as flaperons, horizontal stabilizers, and rudders can be stopped at popular angles using polycaps.
The leading edge flap, which can be set up or down, also adds movement to the model.
★The ejection seat in the cockpit is attached to the slide rail and has the same structure as the actual aircraft, so it can be removed even after completion.
Includes 1 pilot figure in seated position
★Two types of canopy parts are included: transparent and smoked.
★The air brake at the rear of the fuselage can be opened or closed.
★Tires are made of realistic synthetic rubber
Also includes wheel chocks for use when parking the aircraft.
★4 types of markings are available, including aircraft participating in Tiger Meet and aircraft participating in Operation Iraqi Freedom, which have flashy markings on the vertical tail.
Masking stickers for canopy painting and safety pin tag sheets are also included.
★If you remove the weapons, canopy, and vertical stabilizer with a polycap from the completed model, you can use the inner lid as a pedestal to store it in the package.
*This product is a plastic model that requires assembly and painting.
*Adhesive, tools, paint, etc. are required separately for assembly and painting.
*"Plastic model" is a registered trademark owned by the Japan Plastic Model Industry Cooperative Association.
From Amazon US Air Force masterpiece fighter F-16 Fighting Falcon
A plastic model assembly kit that reproduces the F-16CJ [Block 50] whose engine has been replaced with a thrust-enhanced type and can also perform missions to suppress enemy air defense radars.
Not only is the proportions accurate as can be expected from a large model, but the richness of detail expression such as panel lines is a sight to behold.
The featured F110-GE-129 turbofan engine is removable, and a trolley for mounting the engine is also included.
The main parts are assembled using screws, and the pillars are made of die-casting, giving the finished product sufficient strength.
In addition, poly cap stops are used to attach accessory parts such as missiles, bombs, and additional tanks.
Even after completion, you can change it and choose your favorite weapon mounting pattern.
Furthermore, the vertical stabilizer can be removed even after completion, and the finished product can be stored in a package, an unprecedented mechanism.
Pilot doll with 4 types of markings
P.when(A).execute(function(A) {A.on(a:expander:toggle_description:toggle:collapse, function(data) {window.scroll(0, data.expander.$expander[ 0].offsetTop-100);});});Safety Warning None Read more


Tags:

Tamiya   United States Air Force   1:32 scale   Lockheed Martin   飛行機・ヘリコプター   Plastic model kit   Tamiya 1/48 Lockheed Martin F-16CJ   Tamiya 1/32 F-16CJ Fighting Falcon   F-16 CJ Block 50 (FOR Tamiya Kit)