Plastic model kit that requires assembly and painting
Tools, paint, etc. are required separately.

Product introduction The battleship Musashi, which was a symbol of the Combined Fleet along with Yamato, reappeared with the addition and specification change of 25mm triple machine gun parts with precision molding The product is an unpainted kit that requires adhesive assembly and painting.
The scale is 1/700, and it is an offshore model that does not include the bottom of the ship.
It is a product using a conventional (special series) mold.
Battleship Musashi is the second ship of the last ship type "Yamato type"
designed and built by the Japanese Navy, and was completed in August 1942, the year after the start of the war, at the Kure Naval Arsenal.
Equipped with nine 46-centimeter guns, the largest in the world, and a displacement of 64,000 tons, it was an unprecedented ship.
Transferred to the Combined Fleet on the same day as completion.
Aircraft were becoming the mainstay of the era, and Musashi was undergoing refurbishment to strengthen its anti-aircraft armament, making sorties in the Battle of Mariana and Leyte Gulf.
In October 1944, the U.S. forces landed on the island of Hishima, and participated in the Sho Ichigo operation (Battle of Leyte Gulf) as a member of the combined fleet, including Yamato and Nagato, but was sunk in the Sibuyan Sea by an air attack. Did

-The product is modeled after the Sho Ichigo Operation (Battle of Leyte Gulf) in October 1944.
・A figure where two secondary guns are removed and a reinforced high-angle gun section is added, but the guns are not in time and the machine guns are arranged.
-The final shape for Musashi with No. 13 electric probe on the rear mast

-The hull is composed of a single port and port side and the upper wooden deck part.
- The wooden deck is a convex mold expression
・Parts molding color including hull and bottom plate is gray
・The bridge and chimney are left and right laminated.

-Different from the Yamato, it has a high-angle turret that didn't make it in time. -The main gun integrates the gun barrel and canvas, and the elevation angle is fixed at the locking position.
- The secondary gun is reduced to two units, and the turret and barrel are integrated parts.
・The 25mm 3-barreled machine gun (without shield) comes with conventional molded parts and precision-molded mold parts used in 2018, which can be selected.
・Two types of barrel elevation angles for the shielded 25mm triple machine gun can be selected: high elevation angle and locking position.
-There are two types of ship-borne water reconnaissance aircraft, a zero-type observation aircraft and a zero-type (three-seat) water reconnaissance aircraft, and two of each are included.
・The molded color of the carrier-based aircraft is gray.

・ 3 types of decals included
・ Decals that include the warship flag, the rising sun flag, and the markings of the carrier-based aircraft
・Three sizes are available for warship flags, etc.
Includes 1/700 scale 10th, 6th, and 3rd widths of the real thing.
・Includes the Hinomaru of carrier-based aircraft, the ally identification belt (yellow belt), etc.
・Decals that include draft notation, chrysanthemum crest on the bow, and ship name notation on the stern (two types: gold and warship-colored)
・Decals recorded so that the walking belt on the aerial work deck at the rear of the ship can be easily expressed.
Molded parts are made up of two colors, gray and transparent.
249 assembly parts [Attached contents] ・Runner x31 ・Assembly manual x1 ・Decal x3 *This product is made in Japan.
*This product is a plastic model kit that requires assembly.
No safety warning
Dimensions : ‎41 x 15 x 6 cm