It is a special specification of Astute 2022, a middle class rear wheel drive buggy that appeared in 1989, an assembly kit of an electric radio control car that inherited the name of Astute.
A low and smooth polycarbonate body designed by Kota Nezu of znug design is painted in red and cut.

The characteristic front and rear mini fenders are also painted / cut in red.
Put a marking sticker and paint the doll to complete the body.
The chassis adopts a monocoque frame, and the motor is mounted in the midship.
A configuration that secures the traction of the rear tires by placing the heavy running battery horizontally on the rear.

It is a rear wheel drive chassis that suppresses the vehicle height by adopting the inboard front suspension and centrally arranges the mechanism on the monocoque frame in a well-balanced manner.
The motor is mounted horizontally on the midship, and the running battery is mounted horizontally near the rear, so that the drive wheels are fully loaded.

The sealed gearbox has a built-in ball diff with a limited slip effect.
Double wishbone 4-wheel independent suspension equipped with CVA oil damper with high shock absorption
The camber angle can be adjusted using a turnbuckle shaft on the upper arm.

Overall length = 387mm The photo shows the kit assembled and partially painted.
* Body is painted and cut

Product introduction Overall length 387 mm, overall width 246 mm, overall height 125 mm (wing stay low position)
Wheelbase: 284mm
Tread = front 215mm, rear 205mm
Mainframe = resin bathtub type
Drive system = rear wheel drive
Diff gear = ball diff
Steering = 3 split tie rod type
Suspension = double wishbone 4-wheel independent
Tire width / diameter = front 27 / 79mm, rear 41 / 82mm
Damper = CVA oil damper
Gear ratio = 10.71: 1 (when using kit standard 17T pinion)
540 type motor (sold separately)
Full bearing specifications
Speed controller = ESC specifications (sold separately) [Required separately] 540 type motor, RC mechanism: 2-channel radio set (transmitter, receiver, ESC, low profile servo), running battery, charger, transmitter power supply
* A power supply is required to drive this product, but batteries, batteries, chargers, etc. are not included.
Also, motors, transmitters, RC mechanisms, etc. are not included.
It is necessary to purchase additional parts, assemble, and paint before running.
* This product does not use fuel
This product does not contain fuel
* This product does not include paint or adhesive.
Safety warning Please drive in a wide and safe place such as a circuit dedicated to RC cars.
Never run on the road
Do not run near crowded areas, parks or small children
Do not run in a small space or indoors
Do not run in places that disturb other people, such as schools, hospitals, and housing.
Do not run at night or early in the morning

Dimension: 39 x 25 x 13 cm