Plastic model that needs to be assembled
Separate tools required

With multicolor molding, you can enjoy painting etc. to your liking

Snap fit, no glue required

Target age: 15 years old and over Product introduction Battleship Yamato Sortie for Okinawa, final appearance Commercialized with "black painted deck"
specifications Product is a kit format that requires assembly
1/700 scale
No need to paint: Each part is colored with a molding color, and some parts are colored with a sticker.
No glue required: Designed to fit parts together for easy assembly
The first Yamato-class battleship, "Yamato,"
was completed in December 1945 as a culmination of large-scale battleship construction technologies from Kongo-class to Nagato-class.
With a standard drainage of 64,000 tons and a 46 cm gun on the main gun, it is the highest level in the world in all, and it became the flagship of the Combined Fleet with full satisfaction, and in the Battle of Midway, the main fleet, Isoroku Yamamoto, Commander-in-Chief of the Combined Fleet Sortie as a flagship to rise
After that, while the aircraft became the main force of the battle, Yamato was remodeled by removing a part of the secondary armament and strengthening the anti-aircraft firearms, and in October 1945, participated in Operation Shoichi / Battle of Leyte Gulf, April 1945. In order to crush the U.S. forces that had landed in Okinawa at the water's edge, the end was reached by the attacks of many U.S. carrier-based aircraft.
The wooden deck comes with special parts molded in a dark gray special color instead of the conventional wood color
The screw propeller comes with gold molded parts that are more realistic than the conventional beige color
The product is three-dimensionalized with a completely new design and new mold in 2015 with the motif of Operation Tenichi (Operation Okinawa Special Attack) in April 1945.
The bottom / hull parts are separated by the water line, and both offshore models and full hull models can be manufactured.
Special parts are used for the parts in order to express the shape difference from the products at the time of completion and 1945.
The hull is split left and right, split by water line
Molded in a special gray color that imitates the color of the warship used at the Kure Naval Arsenal
Dedicated to make many portholes closed, concave engraving for unclosed windows and convex engraving for closed windows for sharp reproducibility
The port side electric circuit attached to the side is firmly expressed up to the fastening part
The bottom of the ship is made into one-piece parts by making full use of the slide mold
No need to process joints
Bulbous bow on the bow is realistically reproduced with three-dimensional modeling
The rudder is three-dimensional with a square shape different from the third ship Shinano
The surface of the rudder is full of precision that also expresses the seams of steel plates.
The main gun can be raised and lowered and turned
Achieves both minimal parts and realistic modeling
The direction of the 46 cm main gun is opened using a slide mold.
Special parts are prepared for both the main gun canopy and the machine gun seat to reproduce the machine gun seat with the additional 2nd and 3rd main gun canopies.
The secondary armament can be swiveled, and the barrel and turret are integrated into a one-piece structure.
For the bridge, split and slide molds are used to arrange the seams between the parts as much as possible, and the parts are integrated.
The No. 22 electric probe on both sides of the bridge is a special product that reproduces the relocated appearance.
Designed to allow the 15-meter rangefinding and directional board to turn
Behind the bridge, an additional soldier waiting area and an expanded signal station deck are prepared with special parts.
The chimney is a combination of left and right, and it expresses everything from steam pipes, whistle pipes, and monkey rattals.
Very realistic modeling with a sense of depth with the cap part (lattice) on the top removed
The mast has a two-piece structure, and is designed to integrate the No. 13 electric probe installed at this time.
Two models of carrier-based aircraft are recorded with special dark green color parts
One each of the Zero-type (Sanza) seaplane reconnaissance aircraft and the Zero-type observation aircraft
The panel line is concave engraving, and the propeller is integrated with the aircraft by a slide mold for precise expression.
Comes with a pre-cut sticker with excellent sticking followability that allows you to easily color details
Includes waterproof canvas for main and secondary armament, walking zone behind No. 3 main gun, warship flag, carrier-based aircraft Hinomaru mark, etc.
Includes the Nobori of the Unreasonable Gonten, the Kikusui mark next to the chimney, and the flag of Lieutenant General Seiichi Ito, the last commander of the seat.
Includes a pedestal designed with a black inconspicuous straight line for the exhibition after completion
Adhesive bonus parts are included for users who want a more precise feeling.
Bonus parts include 78 machine gun ammunition boxes, mast stanchions, and aerial stanchions on the secondary armament canopy.
Box art by Yoshiyuki Takani at Yamato, who sails at high speed in fine weather
Molded parts consist of all 6 colors
(Kure Naval Arsenal color, ship bottom color, black, dark gray, gold, dark green) Size at the time of completion 379x60x77 mm (excluding the pedestal for exhibition) [Attachments]
・ Runner x29
・ Assembly manual x2
・ Colored sticker x1 * This The product is made in Japan
* This product is a plastic model kit that requires assembly.
No safety warning


Tags:

FUJIMI   Black   Tamiya Corporation   Plastic model   Fujimi Mokei   Japanese battleship Yamato   Imperial Japanese Navy   1:700 scale   Ships   submarines   Fujimi model 1/700 ship NEXT series No.01 Japanese Navy battleship Yamato