USA: Saturday, Nov 21 ~
Australia: Sunday, Nov 22 ~
Asia: Saturday, Nov 21
UAE: Sunday, Nov 22
Order within 2 Hours 16 mins with Scheduled Delivery. If you place an order within this time, We will ship on Thursday, Nov 19 2026 This delivery time is calculated by DHL and FedEx. You can check the exact delivery date on checkout page.
Buyer Protection
Full refund if not genuine. Full or partial refund, if the new item is not as described.
No reviews on this item...
Non-scale
No painting required: Each part is colored with a molding color, and fine coloring is expressed with a sticker
No glue required: Designed to fit parts together for easy assembly
Product introduction The aircraft carrier Soryu was a force that played a part in the Japanese Navy's MTF at the beginning of the Pacific War.
Before the war, a well-balanced Soryu appeared from Fengxiang to Ryujo, Akagi / Kaga, and utilizing the accumulated technology and experience.
Soryu, which was completed at the Kure Naval Arsenal in 1945, when the situation began to set in the dark clouds, was a ship with a displacement of 15,900 tons, a speed of 34 kt, and a number of 57 aircraft.
At the beginning of the war, he participated in the Pearl Harbor operation as a Nagumo Mobile Task Force, and was active in all aspects such as sweeping the British Army to the Indian Ocean. At a short age of weak, he was hit by Akagi and Kaga and died in the war.
During Operation Midway, a Type 2 ship detective, which would later become a comet bomb, was test-mounted, and a Hinomaru was drawn on the front edge of the flight deck to identify allies as a feature of the appearance.
The product is modeled after the beginning of the Pacific War of the Indian Ocean operation from the beginning of the war and the appearance of the Battle of Midway, which was the last participating operation, and is finished in a style with condensed deformed shape features.
-Molded parts are composed of colored parts of warship color and ship bottom color
-Since the design is divided into the hull and the bottom, it can be either an offshore type or a full hull type.
The characteristic parts found in real ships are firmly three-dimensionalized.
-Major ship parts consist of gray moldings that imitate the color of warships
-The hull has a one-piece structure that integrates the left and right sides with a slide mold to reproduce the smart shape that is characteristic of medium-sized aircraft carriers.
-On the side, a three-tiered porthole that has been reproduced up to the eaves alongside the slurries is molded, and the uneven shape of the intake passage etc. is also expressed as an integral part.
-Reinforcing material is reproduced on the back side of the high angle turret, and the guide plate is reproduced inside the chimney, so you can enjoy the atmosphere like a scale model.
・ Three-dimensional anchors are available as separate parts, including one at the stern.
In addition, one spare part is attached in case of damage
-The anchor deck on the bow and the deck floor of the short boat on the stern are densely engraved with a non-slip strip pattern, giving a sense of detail.
・ The 12-meter internal fire boat and the 12-meter internal fire lunch are recorded separately for the ship-mounted boat, and the lunch hood is reproduced with a canvas-colored sticker.
-The machine gun seat is a U-shaped integrated part that reduces the time and effort of assembling by combining the left and right rear three sides into one.
-The machine gun seat has a non-slip strip pattern, and the machine gun of another part is attached with a snap fit (press-fit type).
-Equipped with 11 25 mm twin machine guns, of which only the rear of the chimney is shielded to reproduce the features
・ The 12.7 cm high-angle gun has a base engraved on the turret, and the barrel has a separate part that reproduces the muzzle with a slide mold.
・ The wireless antenna support is movable so that it can be tilted when the ship departs.
-The flight deck is finely carved while reproducing the characteristic shape.
-On the deck, the wooden deck just like 1/700 scale is reproduced by engraving, and the depth is suitable for inking by painting reproduction.
・ The elevator expresses an eye ring, and the surrounding dents are larger and deeper than the carvings on the wooden deck, giving it a crisp look.
・ A gutter runs all around the flight deck, and it is expressed without deck equipment such as searchlight palate and crane cover.
-The flight deck support reproduces the difference in cross-sectional shape before and after, and individual parts are prepared
-Coloring is expressed with the attached pre-cut sticker
Since the accessories and deck pattern are reproduced by engraving, painting is also possible.
-The bottom parts are bowl-shaped on the left and right, and are molded in red that imitates the color of the bottom of the ship.
-The screw bracket and propeller are separate parts, and the shape is reproduced firmly.
・ It expresses a double rudder different from Hiryu.
-Comes with a deformed carrier-based aircraft like a ship
-The carrier-based aircraft includes three models, "Zero Fighter Type 21", "Type 99 Ship Bomb", and "Type 99 Ship Attack", and markings such as the Hinomaru are represented by the attached stickers.
-Molding color is Zero Fighter-Type 99 rifle is gray, Type 99 rifle is dark green and comes with 3 each
-Comes with two types of stickers, a sticker that assists coloring and a decal that is convenient when manufacturing by painting.
-Steel / wooden deck, white line, black painted part at the tip of the chimney, etc. are cut out and recorded on the sticker.
-Records even the coloring of small parts such as the bridge window and the chrysanthemum flower emblem on the bow
-The decal includes parts that are difficult to reproduce, such as the white line on the flight deck, the landing sign on the red and white line, and the Hinomaru on the carrier-based aircraft.
-The attached ship name sticker comes with a size that matches the separately sold display ship pedestal.
-Comes with a special sticker that reproduces the marking of the Hinomaru that was drawn on the flight deck during the Battle of Midway
(It is necessary to cut out with scissors etc.)
・ A special decal with a white circle and a mark painted in red is attached so that it can be reproduced by painting like a sticker
・ Three type 2 carrier-based reconnaissance aircraft (later comet ship bombs) that were test-mounted during the Battle of Midway are included.
Molded parts consist of all 4 colors
Number of assembled parts: 90 points Completed size: Approximately 11x6x5cm [Included contents]
・ Runner x11
・ Seal x3
・ Decal x2
・ Assembly manual x2 * This product is made in Japan
* This product is a plastic model kit that requires assembly.
No safety warning
Dimension: 15 x 24 x 6 cm
Tags:
FUJIMI Grey Plastic model Fujimi Mokei Aircraft carrier Ships submarines Fujimi Chibi-maru Fleet Battle of Midway Chibimaru Fleet Soryu Special Specification (Battle of Midway) Fujimi Chibimaru Ship Soryu