Shipping and Returns
Europe, UK: Thursday, Nov 19 ~
USA: Monday, Nov 16 ~
Australia: Wednesday, Nov 18 ~
Asia: Tuesday, Nov 17
UAE: Wednesday, Nov 18
Order within 11 Hours 21 mins with Scheduled Delivery. If you place an order within this time, We will ship on Monday, Nov 16 2026 This delivery time is calculated by DHL and FedEx. You can check the exact delivery date on checkout page.
USA: Monday, Nov 16 ~
Australia: Wednesday, Nov 18 ~
Asia: Tuesday, Nov 17
UAE: Wednesday, Nov 18
Order within 11 Hours 21 mins with Scheduled Delivery. If you place an order within this time, We will ship on Monday, Nov 16 2026 This delivery time is calculated by DHL and FedEx. You can check the exact delivery date on checkout page.
Reembolso total se não for genuíno. Reembolso total ou parcial, se o novo item não for como descrito.
Protecção do Comprador
Avaliacao do cliente ( 0)
Nenhuma avaliacao sobre este item...
Descricao (2,241 characters)
Assembling is an inset type that does not require adhesive
Separate tools are required to install the parts
Completed size: Overall length 152 mm, overall width 92 mm
With double shaft motor
Spin Ax Mk.II was designed for Mini 4WD PRO by Mr. Tetsuhiro Koshita, who rubbed the machine of Tokichi Mikuni, one of the popular characters who appeared in "Bakuso Brothers Let's &
Go !!"
* Batteries are not included in this kit
Two AA batteries are required separately for running
Product introduction [Evolved aero form appeals speed] It is a plastic model assembly kit of a four-wheel drive racer that is fun to race with high performance running. It is expensive with a double shaft motor with the shafts on both ends extended in the center of the car body. Achieves drive efficiency. The MS chassis consists of three parts, nose, center, and tail, and can be attached and detached with a single touch. You can enjoy a wide range of setting changes speedily. Spinax Mk.II is "Bombing Brothers Let's &
Go !!"
Designed for the Mini 4WD PRO by Mr. Tetsuhiro, who rubbed the machine of Tokichi Mikuni, one of the popular characters that appeared in. The attractive body has increased fearlessness such as the shape of the cockpit where it stands. Small diameter tires are attached to the fluorescent yellow wheel. N-02 is adopted for the nose unit. [MS chassis] 3-split type that realizes excellent rigidity The "MS chassis"
has a "midship (MS) layout"
in which heavy parts such as a double shaft motor with the shafts at both ends of the motor extended and a battery are placed in the center of the chassis, and a mini 4WD traditional 4WD (four-wheel drive) mechanism for high-speed driving. Demonstrates excellent stability even at times. The chassis consists of 3 parts, nose, center, and tail, and can be attached and detached with a single touch. You can enjoy a wide range of setting changes speedily. * There are two types of nose units. [Basic specifications ]
・ Overall length 152mm
・ Overall width 92mm
・ With double shaft motor
-Assembly is an inset type that does not require adhesive [Items to be purchased separately]
・ 2 AA batteries Safety warning Not applicable
Dimension: 15.2 x 9.2 x 4.5 cm
Tags:
Separate tools are required to install the parts
Completed size: Overall length 152 mm, overall width 92 mm
With double shaft motor
Spin Ax Mk.II was designed for Mini 4WD PRO by Mr. Tetsuhiro Koshita, who rubbed the machine of Tokichi Mikuni, one of the popular characters who appeared in "Bakuso Brothers Let's &
Go !!"
* Batteries are not included in this kit
Two AA batteries are required separately for running
Product introduction [Evolved aero form appeals speed] It is a plastic model assembly kit of a four-wheel drive racer that is fun to race with high performance running. It is expensive with a double shaft motor with the shafts on both ends extended in the center of the car body. Achieves drive efficiency. The MS chassis consists of three parts, nose, center, and tail, and can be attached and detached with a single touch. You can enjoy a wide range of setting changes speedily. Spinax Mk.II is "Bombing Brothers Let's &
Go !!"
Designed for the Mini 4WD PRO by Mr. Tetsuhiro, who rubbed the machine of Tokichi Mikuni, one of the popular characters that appeared in. The attractive body has increased fearlessness such as the shape of the cockpit where it stands. Small diameter tires are attached to the fluorescent yellow wheel. N-02 is adopted for the nose unit. [MS chassis] 3-split type that realizes excellent rigidity The "MS chassis"
has a "midship (MS) layout"
in which heavy parts such as a double shaft motor with the shafts at both ends of the motor extended and a battery are placed in the center of the chassis, and a mini 4WD traditional 4WD (four-wheel drive) mechanism for high-speed driving. Demonstrates excellent stability even at times. The chassis consists of 3 parts, nose, center, and tail, and can be attached and detached with a single touch. You can enjoy a wide range of setting changes speedily. * There are two types of nose units. [Basic specifications ]
・ Overall length 152mm
・ Overall width 92mm
・ With double shaft motor
-Assembly is an inset type that does not require adhesive [Items to be purchased separately]
・ 2 AA batteries Safety warning Not applicable
Dimension: 15.2 x 9.2 x 4.5 cm
Tags:
