การจัดส่งสินค้าและการคืนสินค้า
Europe, UK: Tuesday, Nov 17 ~
USA: Sunday, Nov 15 ~
Australia: Monday, Nov 16 ~
Asia: Sunday, Nov 15
UAE: Monday, Nov 16
Order within 5 Hours 54 mins with Scheduled Delivery. If you place an order within this time, We will ship on Friday, Nov 13 2026 This delivery time is calculated by DHL and FedEx. You can check the exact delivery date on checkout page.
USA: Sunday, Nov 15 ~
Australia: Monday, Nov 16 ~
Asia: Sunday, Nov 15
UAE: Monday, Nov 16
Order within 5 Hours 54 mins with Scheduled Delivery. If you place an order within this time, We will ship on Friday, Nov 13 2026 This delivery time is calculated by DHL and FedEx. You can check the exact delivery date on checkout page.
การคุ้มครองผู้ซื้อ
คืนเงินเต็มจำนวนหากไม่ใช่ของแท้. คืนเงินเต็มจำนวนหรือบางส่วนหากรายการใหม่ไม่ตรงตามที่อธิบายไว้
รีวิวของลูกค้า ( 0)
ความคิดเห็นสินค้าไม่มีในตอนนี้
คำอธิบายสินค้า (2,579 characters)
Assembly required kit.
Tools and other equipment are required separately.
When completed, the model will be 156mm long, 97mm wide, and 38mm high.
A special version featuring a lightweight and impact-resistant polycarbonate body.
The FM-A chassis and undercarriage are coordinated in light blue.
Battery type: 2 x AA batteries (batteries are sold separately and must be purchased separately).
[Product introduction]
Tamiya Mini 4WD Special Project Gun Blaster XTO Light Blue Special (Polycarbonate Body) 95439 - A plastic model assembly kit of a high-performance racer employing shaft-drive four-wheel drive.
The Gun Blaster XTO Light Blue Special is a special version featuring a lightweight and impact-resistant polycarbonate body.
While retaining the powerful body design that conveys a sense of driving performance, the wheel arches have been cut out, making assembly easier.
Furthermore, the FM-A chassis and undercarriage are coordinated in light blue.
The clear body gives it a cool impression.
The graphics that change from yellow to red, and the headlights, are represented using clear stickers.
The chassis uses the FM-A, which features a front motor layout incorporating an aerodynamic design.
Because the center of gravity is located towards the front of the vehicle, it is possible to drive stably even on courses with many ups and downs.
It comes standard with a low-friction resin skid bar on the front lower section, and the four rollers are also made of low-friction resin.
The rear rollers, in particular, are 8mm thick for enhanced stability.
Furthermore, the motor can be easily replaced from the bottom of the chassis, and setting changes can be made quickly.
The aero side stays, designed based on the cross-sectional shape of an airplane wing, can accommodate various parts.
The chassis itself is made of light blue ABS resin, and the low-friction resin A parts such as the under panel and skid bars are also uniformly light blue.
Additionally, the white spiral spoke wheels are fitted with light blue low-profile tires.
The gear ratio is set to 3.5:1.
Basic specifications: Overall length 156mm, overall width 97mm, overall height 38mm.
Motor included.
Assembly is done by snapping and screwing, no glue required.
(C) Tetsuhiro Koshita/Shogakukan (C) KOSHITA?SHOGAKUKAN
* This product is a kit that requires assembly.
* Assembly requires additional tools, etc.
* Please purchase AA batteries (2) separately.
* This product does not include adhesive, paint, tools, batteries, etc.
[Safety warnings]
None.
Dimension: ?15.6 x 9.7 x 3.7 cm.
Model Number: 95439
Tags:
Tools and other equipment are required separately.
When completed, the model will be 156mm long, 97mm wide, and 38mm high.
A special version featuring a lightweight and impact-resistant polycarbonate body.
The FM-A chassis and undercarriage are coordinated in light blue.
Battery type: 2 x AA batteries (batteries are sold separately and must be purchased separately).
[Product introduction]
Tamiya Mini 4WD Special Project Gun Blaster XTO Light Blue Special (Polycarbonate Body) 95439 - A plastic model assembly kit of a high-performance racer employing shaft-drive four-wheel drive.
The Gun Blaster XTO Light Blue Special is a special version featuring a lightweight and impact-resistant polycarbonate body.
While retaining the powerful body design that conveys a sense of driving performance, the wheel arches have been cut out, making assembly easier.
Furthermore, the FM-A chassis and undercarriage are coordinated in light blue.
The clear body gives it a cool impression.
The graphics that change from yellow to red, and the headlights, are represented using clear stickers.
The chassis uses the FM-A, which features a front motor layout incorporating an aerodynamic design.
Because the center of gravity is located towards the front of the vehicle, it is possible to drive stably even on courses with many ups and downs.
It comes standard with a low-friction resin skid bar on the front lower section, and the four rollers are also made of low-friction resin.
The rear rollers, in particular, are 8mm thick for enhanced stability.
Furthermore, the motor can be easily replaced from the bottom of the chassis, and setting changes can be made quickly.
The aero side stays, designed based on the cross-sectional shape of an airplane wing, can accommodate various parts.
The chassis itself is made of light blue ABS resin, and the low-friction resin A parts such as the under panel and skid bars are also uniformly light blue.
Additionally, the white spiral spoke wheels are fitted with light blue low-profile tires.
The gear ratio is set to 3.5:1.
Basic specifications: Overall length 156mm, overall width 97mm, overall height 38mm.
Motor included.
Assembly is done by snapping and screwing, no glue required.
(C) Tetsuhiro Koshita/Shogakukan (C) KOSHITA?SHOGAKUKAN
* This product is a kit that requires assembly.
* Assembly requires additional tools, etc.
* Please purchase AA batteries (2) separately.
* This product does not include adhesive, paint, tools, batteries, etc.
[Safety warnings]
None.
Dimension: ?15.6 x 9.7 x 3.7 cm.
Model Number: 95439
Tags:
