Product Information Manufacturer: TEIN
Product Name: FLEX Z
Manufacturer Part Number: VSD48-C1AS3
JAN Code: 4582202764912
Automaker: Daihatsu
Vehicle Model: Tanto Model Number: L375S
Year: 2007/12~2013/10
Drive: FF
Compatibility Details: Engine: 660
Grade: X LIMITED SPECIAL/X LIMITED/X/L
Specifications: Springs Included: Yes EDFC Compatible: Yes Damping Force Adjustment (F/R): Yes/Yes Overall Length Adjustment (F/R): Yes/- Mounts (F/R): Reinforced Rubber Mounts Included/Genuine Mounts Standard Ride Height Relative to Genuine mm (F/R): -55/-45 Ride Height Adjustment Range Relative to Genuine mm (F/R) Maximum (Lower Limit ~ Upper Limit): -94~-29/-69~-33 Ride Height Adjustment Range Relative to Genuine mm (F/R) Recommended (Lower limit to upper limit): -65 to -45 / -55 to -35 Spring rate Kgf/mm (F/R): 5.0 / 2.7 Free length mm (F/R): 175 / 264 Inner diameter mm (F/R): φ70 / -
Remarks
・Notes: Please be sure to check the PC page.
Set contents: Product + delivery Manufacturer name TEIN Product name FLEX Z Manufacturer part number VSD48-C1AS3
JAN code 4582202764912 Car manufacturer Daihatsu Car model Tanto Model L375S Year 2007/12~2013/10 Drive FF Fit details Engine: 660
Grade: X LIMITED SPECIAL/X LIMITED/X/L Specifications Spring included: Yes EDFC compatible: Yes Damping force adjustment (F/R): ○/○ Overall length adjustment (F/R): ○/- Mount (F/R): Reinforced rubber mount included/Genuine mount Standard ride height relative to genuine mm (F/R): -55/-45 Ride height adjustment range relative to genuine mm (F/R) Maximum (lower limit to upper limit): -94 to -29/-69 to -33 Ride height adjustment range relative to genuine mm (F/R) Recommended (lower limit to upper limit): -65 to -45/-55 to -35 Spring rate Kgf/mm (F/R): 5.0/2.7 Free length mm (F/R): 175/264 Inner diameter mm (F/R): φ70/-
Remarks
Caution is required for vehicles equipped with 14-inch wheels, as there is little clearance between the wheel and the shock absorber. For vehicles equipped with fog lamps, if the lower edge of the fog lamp is less than 250 mm above the ground, it will violate safety standards, so please use it at a ride height that ensures a ground clearance of 250 mm or more. Rear: If interference occurs due to individual vehicle differences, it may be necessary to cut or remove the interior. The values ​​are calculated relative to the normal ride height. Recommended ride height adjustment range: These are values ​​confirmed by the manufacturer during installation. Precautions The ride height data is reference measurement data from development vehicles, so there may be differences depending on individual vehicle differences and assembly conditions. (Also, there may be differences between the left and right sides, and the ride height may drop after some time has passed since assembly due to settling.) Using it outside the recommended ride height adjustment range may cause damage to the shocks or the vehicle, and may result in non-compliance with safety standards. Please note that the manufacturer will not be held responsible for any damage in that case. Depending on the wheel size, offset, tire brand and size, interference may occur during driving even at the manufacturer's standard position. Set contents: Product + shipping product
JAN/ISBN code: 4582202764912
Product code: VSD48-C1AS3-qq-e-0542

Tags:

Car   Honda Civic   Shock absorber   Car suspension   Toyota Prius   Tesla   Coilover   TEIN   Tesla Model Y