Product Information Manufacturer: TEIN
Product Name: FLEX Z
Manufacturer Part Number: VSA70-C1SS3
JAN Code: 4582202760389
Automaker: Honda
Model: Odyssey Model Number: RB1
Year: 2003/10~2008/10
Drive: FF
Compatibility Details: Engine: 2400
Grade: ABSOLUTE
Specifications: Springs Included: Yes EDFC Compatible: Yes Damping Force Adjustment (F/R): Yes/Yes Overall Length Adjustment (F/R): Yes/Yes Mount (F/R): Reinforced Rubber Mount Included/Reinforced Rubber Mount Included Standard Ride Height Relative to Stock mm (F/R): -35/-35 Ride Height Adjustment Range Relative to Stock mm (F/R) Maximum (Lower Limit ~ Upper Limit): -122~+17/-128~-4 Ride Height Adjustment Range Relative to Stock mm (F/R) Recommended (Lower limit to upper limit): -55 to -35 / -50 to -30 Spring rate Kgf/mm (F/R): 10.0 / 10.0 Free length mm (F/R): 225 / 175 Inner diameter mm (F/R): φ70 / φ70
Remarks
・Notes: Please be sure to check the PC page.
Set contents: Product + delivery Manufacturer name TEIN Product name FLEX Z Manufacturer part number VSA70-C1SS3
JAN code 4582202760389 Car manufacturer Honda Model Odyssey Model RB1 Year 2003/10~2008/10 Drive FF Fit details Engine: 2400
Grade: ABSOLUTE Specifications Springs included: Yes EDFC compatible: Yes Damping force adjustment (F/R): Yes/Yes Overall length adjustment (F/R): Yes/Yes Mount (F/R): Reinforced rubber mount included/Reinforced rubber mount included Standard ride height compared to genuine mm (F/R): -35/-35 Ride height adjustment range compared to genuine mm (F/R) Maximum (lower limit to upper limit): -122 to +17/-128 to -4 Ride height adjustment range compared to genuine mm (F/R) Recommended (lower limit to upper limit): -55 to -35/-50 to -30 Spring rate Kgf/mm (F/R): 10.0/10.0 Free length mm (F/R): 225/175 Inner diameter mm (F/R): φ70/φ70
Remarks
For the front, please remove the positioning bracket from the genuine shock absorber before use.For the rear, since it is necessary to remove the interior when adjusting the damping force, we recommend installing the EDFC series at the same time.For vehicles equipped with fog lamps manufactured after 2006/01, if the lower edge height of the fog lamp is less than 250 mm above the ground, it will violate safety standards. Please be sure to check the fog lamp height before purchasing.The values ​​are calculated relative to the normal ride height.Recommended ride height adjustment range:These are values ​​confirmed by the manufacturer during installation.NotesThe ride height data is reference measurement data from development vehicles, so there may be differences depending on individual vehicle differences and assembly conditions. (There may be differences between the left and right sides, and the ride height may decrease after some time following installation due to settling.) Using the product outside the recommended ride height adjustment range may cause damage to the shocks or the vehicle, and may result in non-compliance with safety standards. Please note that the manufacturer will not be held responsible for any damage in such cases. Depending on the wheel size, offset, tire brand and size, interference may occur during driving even at the manufacturer's standard position. Set contents: Product + shipping product
JAN/ISBN code: 4582202760389
Product code: VSA70-C1SS3-qq-e-381

Tags:

Toyota   Car   Honda Civic   Shock absorber   Car suspension   Tesla   Coilover   TEIN   Tein VSB90-C1SS3