Product Information Manufacturer: TEIN/Tein
Product Name: FLEX Z
Manufacturer Part Number: VSBDV-C1AS3
JAN Code: 4589533497915
Automaker: Toyota
Vehicle Model: Alphard PHEV Model Number: AAHP45W
Year: 2025.01~
Drive: 4WD
Fit Details: Engine: 2500
Grade: EXECUTIVE LOUNGE
Specifications: Please check the PC page for product details
Remarks
: Please check the PC page for product details. Precautions: The ride height data is reference measurement data from the development vehicle, and may differ depending on individual vehicle differences and assembly conditions. (Also, there may be differences between the left and right sides, and the ride height may decrease after some time has passed since assembly due to settling.) Using outside the recommended ride height adjustment range may cause damage to the shocks or vehicle, and may result in non-compliance with safety standards. Please note that the manufacturer will not be held responsible for any damage in such cases. Depending on the wheel size, offset, tire brand, and size, interference may occur during driving even at the manufacturer's standard position.
Set contents: Product + delivery Manufacturer name TEIN/Tein Product name FLEX Z Manufacturer part number VSBDV-C1AS3
JAN code 4589533497915 Automobile manufacturer Toyota Model Alphard PHEV Model AAHP45W Year 2025.01~ Drive 4WD Compatibility details Engine: 2500
Grade: EXECUTIVE LOUNGE Specifications Springs included: Yes EDFC compatible: Yes Damping force adjustment (F/R): ○|○ Overall length adjustment (F/R): ○│- Mount (F/R): Reinforced rubber mount included│Genuine mount Standard ride height relative to genuine mm (F/R): -30│-35 Ride height adjustment range relative to genuine mm (F/R) Maximum (lower limit to upper limit): -83 to -18│-73 to -26 Ride height adjustment range relative to genuine mm (F/R) Recommended (lower limit to upper limit): -40 to -20│-45 to -26 Spring rate Kgf/mm (F/R): 6.0│9.2 Free length mm(F/R):240│232 Inner diameter mm(F/R):-│-
Remarks
When installing the EDFC series, a rear wheel size of 8.5J with an offset of 40 or less is recommended.When the wheel size is 9.0J, there is a possibility that the motor and tire will interfere.The values ​​are calculated relative to the normal ride height.Recommended ride height adjustment range:These are values ​​confirmed by the manufacturer during installation.PrecautionsThe ride height data is reference measurement data from the development vehicle, so there may be differences depending on the individual vehicle and assembly conditions. (Also, there may be differences between the left and right sides, or the ride height may drop after some time has passed since assembly due to settling.)Using it outside the recommended ride height adjustment range may cause damage to the shocks or the vehicle, and may result in non-compliance with safety standards.Please note that the manufacturer will not be held responsible for any damage in such cases.Depending on the wheel size, offset, tire brand and size, interference may occur during driving even at the manufacturer's standard position. Set contents: Product + Delivery product
JAN/ISBN code: 4589533497915
Product code: TIN-qq-e-000359k

Tags:

Car   Shock absorber   Car suspension   Toyota Prius   Tesla   Coilover   TEIN   Ride height   Tein VSB90-C1SS3