The KiNf:2e is a multi-tasking noise filter that can be used to branch off your existing adapters without any noise. It features one LINK output that passes the input directly through, and two noise-filtered output terminals. Each output uses fully isolated circuits, completely separated down to the ground, to suppress noise caused by mixing digital and analog effects. By utilizing a high-capacity adapter for a multi-effects unit, you can easily add more pedals. This high-spec multi-tasking noise filter can be used not only for boards centered around multi-effects units, but also as a small power supply with a DC branch cable. *Adapters are not included with this product. *Please check the capacity of your adapter before use. (Equipment exceeding the adapter's capacity cannot be operated.) This high-spec multi-tasking noise filter can be used in a variety of situations depending on the product. View on the listening page (external site) View on the listening page (external site) Features The KiNf:2e is a multi-tasking noise filter that can be used to branch off your existing adapters without any noise. This unit features one LINK output that passes the input directly through, and two noise-filtered output terminals. Each output utilizes a fully isolated circuit, completely isolated down to the ground, suppressing noise caused by mixing digital and analog effects. By utilizing a high-capacity multi-effects adapter, you can easily add more pedals. This high-spec multi-tasking noise filter can be used not only for boards centered around multi-effects, but also as a small power supply with a DC splitter cable. *Adapters are not included with this product. *Please check the capacity of your adapter before use. (Equipment exceeding the adapter's capacity cannot be operated.) Product Features: Noiseless Splitting from Your Adapter: Connect your adapter to the input for noiseless splitting. Each output utilizes a fully isolated circuit, completely isolated down to the ground, suppressing noise caused by mixing digital and analog effects. Use the multi-effects unit's high-capacity adapter to easily expand your pedal setup. The multi-effects unit's high-capacity adapter can be used to conveniently power a multi-effects unit plus distortion pedals. It can also be used as a compact power supply with a DC branch cable. By using the separately sold DC branch cable, it can also be used as a compact power supply. Specifications: DC IN 9V-24V DC (center negative) LINK OUT 9V-24V (corresponding to input voltage) DC (center negative) DC OUT Isolated output 9V 1,000mA MAX x 2 systems Accessories: Adapter plug 2.5mm inner diameter female (from adaptor) to 2.1mm inner diameter male (to KiNf's INPUT) DC cable 2.1mm inner diameter 30cm x 1 Adapter plug 2.1mm inner diameter female (from KiNf's LINK DC cable) to 2.5mm inner diameter male Current loss rate: 30% Maximum 1,000mA can be supplied to each port under the following conditions: 9V 3A input and no link output. Unit size: 79 x 57 x 25 mm Unit weight: Approximately 130g Package size: 105 x 87 x 33 mm Package weight: Approximately 190g ■ Management code: 4515515670090