Product Information: ■ Product Number: BW906
■ Bulb Type: D4S
■ Bulb Size: W32 x H70mm
■ Total Luminous Flux: 10,000lm (total of two bulbs)
■ Color Temperature: 4,500K
■ Voltage: DC12V
■ Power Consumption: 35W
■ Product Size: H70 x W32 x D32mm
■ Product Weight: 32g
■ Country of Origin: China
■ Compatible with hybrid vehicles and vehicles with idle stop function
■ Warranty Period: 3-year warranty
■ Easy replacement! Replace your factory H.I.D. with the latest LEDs!
■ New brightness surpasses H.I.D.s - Equipped with two of the latest high-brightness LEDs. Achieves superior brightness at approximately 160%* the brightness of factory H.I.D.s. ・This product is ideal for those who want an easy way to brighten their H.I.D.s. The new brightness improves visibility even further, providing powerful support for night driving. *Measurements taken by the manufacturer of the original D4S burner.
■Compact, Integrated Structure for Easy Installation: This product features a compact, integrated structure with the driver unit built into the bulb. ・Same size as the original H.I.D. burner, allowing it to be installed in a wide range of vehicles.
■Wide Light Distribution for Extremely Visible Visibility: This product uses high-brightness LEDs with a wide illumination range. ・By thoroughly tuning the layout of these LEDs, we have achieved a wider horizontal light distribution than the H.I.D. ・By improving visibility of the roadside, you can easily spot pedestrians and cyclists, allowing you to drive with peace of mind.
■4500K Color, Same as the Original H.I.D.: The light color is 4500K, the same as the original H.I.D. ・The slightly yellowish white light provides excellent illumination of the road surface in bad weather such as rain. ・This light color is ideal for those who prioritize visibility. Recommended for those who want to maintain the brightness of the factory H.I.D. bulbs. ■ Excellent heat dissipation design for long-lasting brightness: When LED headlight bulbs are turned on for long periods of time, the brightness will decrease due to the heat generated by the LEDs. ・This product utilizes the latest heat dissipation technology, including a copper substrate, heat pipe, cooling fan, and high-efficiency aluminum heat sink. ・Despite its compact, integrated design, it suppresses heat generation from the LEDs and minimizes brightness loss.
■ Designed specifically for projector fixtures (S type): This product is designed specifically for D4S (primarily projector fixtures). ・Reproduces the same cutoff line as the factory H.I.D. burner, ensuring safe and secure light distribution that does not dazzle oncoming vehicles. *This product is designed for headlamp use as a replacement bulb for factory-installed H.I.D. burners. *Do not install with fixtures other than headlights or using wiring methods other than those specified in the instruction manual. *Doing so may result in poor light distribution or product failure. This product is designed and manufactured to meet new vehicle inspection standards. However, scratches or cloudiness on the lens or reflector due to aging may prevent the bulb from performing as intended and result in the vehicle failing inspection. Please be sure to confirm compatibility before purchasing. (See the vehicle compatibility chart here (manufacturer website)) This product is designed specifically for D2S burners. It cannot be installed on vehicles equipped with D2R burners. It is not compatible with D2S or D4S burners. Be sure to install a product compatible with your vehicle's burner type. For D2S: Manufacturer part numbers BW903 and BW905; for D4S: Manufacturer part numbers BW904 and BW906. Installing a product that does not match your vehicle's burner type may result in malfunctions, such as failure to light or product failure. Always use the original 35W ballast unit. Using a commercially available ballast unit with a different wattage, such as 55W or 45W, may damage the LED bulb or headlights. Do not use in vehicles with modified or altered lighting fixtures. Depending on the vehicle model, you may not be able to receive maintenance-free services from your car dealership after installing this product. While this product is designed to suppress noise, it may still cause interference in areas with weak radio and television signals. The LED light may flicker a few times when first turned on; this is a characteristic of H.I.D. ballasts and is not abnormal. This product will be ordered from the manufacturer upon your order. We do not accept cancellations, exchanges, or returns after an order has been placed. We may be unable to meet your desired delivery date or may have to decline your order due to reasons such as out-of-stock, discontinued production, or undetermined delivery dates. Thank you for your understanding.

---

Light LED Bulb Headlight for Cars, Motorcycles, and Bicycles, Automotive Light, Lens LED JAN/ISBN Code: 4973007824268 Product Code: 4973007824268