Released in April 2021. *Power may not be supplied depending on the camera you are using. Please check the product page for compatible models. Wireless microphone compatible with digital audio interfaces. Equipped with three pickup modes to suit a variety of scenes. Suitable for long-term shooting. Directional pattern: Omnidirectional / Frequency response: 20Hz to 20,000Hz / [ECMW2BT]ECMW2BT Released in April 2021. Wireless microphone compatible with digital audio interfaces. Digital audio interface*1. By connecting to a camera equipped with a multi-interface shoe that supports the digital audio interface (*1), you can achieve low-noise audio recording. The digital audio signal output from the receiver can be recorded directly on the camera, allowing for high-quality recording with minimal noise. In addition, since it supports stereo audio output, when used in combination with a stereo-compatible lavalier microphone, you can capture audio with a more realistic feel. *1 Only when used with a camera equipped with a multi-interface shoe that supports the digital audio interface (FX3/α1/α9 II/α7R IV/α7S III/α7C). The all-new microphone capsule delivers higher quality audio. The newly adopted omnidirectional, high-quality microphone capsule captures sound clearly from any direction. Equipped with an attenuator function. The attenuator reduces the actual recording volume when the sound is too loud. Choose from three attenuation levels: 20dB, 10dB, or 0dB, depending on the volume of the sound source. Equipped with three pickup modes to accommodate a variety of situations. By switching the mode switch on the receiver, you can optimally capture voice and surrounding sounds. Equipped with a 3.5mm stereo mini jack for external microphone input. [Microphone Input] The microphone is equipped with a 3.5mm stereo mini jack for external microphone input. Stereo audio capture delivers immersive sound. It can also be used with lavalier microphones such as the ECM-LV1. [Audio Output] The receiver is equipped with a 3.5mm stereo mini jack for audio output. It can also be used with cameras, PCs, and IC recorders that do not have a multi-interface shoe.
Equipped with microphone and receiver status notification functions. LINK and power indicators prevent recording errors. LINK indicator: Indicates the communication status between the microphone and receiver. Notifying you of the communication status between the microphone and receiver prevents recording errors. POWER indicator: Power indicators are provided on both the microphone and receiver. You can check the remaining battery level to prevent recording errors due to a dead battery.
Wireless convenience and stability. The Qualcomm aptX Low Latency Bluetooth codec provides low latency and high audio quality. Improved wireless connectivity allows for communication up to 200 meters in clear areas. This significantly increases the flexibility of audio recording.
Wireless communication that supports stable communication between the microphone and receiver. Improved wireless connectivity provides a more stable connection between the microphone and receiver, even in obstructed areas or crowded environments with multiple wireless signals. Communication is possible up to 200 meters in clear areas. This significantly increases the flexibility of audio recording. *2 This is the approximate distance when the microphone is visible from the receiver. Actual distance may vary depending on surrounding conditions, such as the presence of metal, human bodies, or reflective surfaces, as well as signal strength. Battery-less/cable-free shooting: Compatible with the Multi-Interface Shoe, a common interface for Sony cameras, this unit can be powered from the camera (*3). Direct connection to the camera also increases shooting flexibility and enables cable-free, highly mobile shooting. *3 Some models, such as the RX1R II and ZV-1, do not supply power via the Multi-Interface Shoe, even with Multi-Interface Shoe-compatible models. In this case, continuous use time using the receiver's built-in battery alone is limited to a maximum of 3 hours. Supporting extended shooting, the receiver can be used continuously for approximately 18 hours with power supplied from the MI shoe. Without the MI shoe, continuous use time is approximately 3 hours using only the built-in battery. Furthermore, continuous use time for the microphone is significantly increased to approximately 9 hours. The microphone also features a built-in lithium-ion battery and can be charged via USB. Other features
All-digital operation from pickup to recording ensures high-quality recording with minimal noise
Digital audio interface compatible
New microphone capsule with attenuator function for higher quality recording Wireless convenience and stability
Wireless communication supports stable communication between microphone and receiver
Low-latency, high-quality Bluetooth codec "Qualcomm aptX Low Battery-free/cable-free shooting. Convenient functions for a variety of scenes. Three sound pickup modes. 3.5mm stereo mini jack for external microphone input. Microphone and receiver status notification function. Windscreen included to reduce wind noise. Dust- and water-resistant design. Suitable for long-term shooting. ■ Specifications ■ Shoe shape: Multi-interface shoe. Power supply method: Multi-interface shoe. Format: Electret condenser type. Mono/Stereo: Mono (built-in microphone), Stereo (external microphone input terminal). Directivity: Omnidirectional. Frequency response: 20Hz - 20,000Hz. Operating temperature: 0°C - 40°C. Storage temperature: -20°C - +45°C Battery Type: Built-in Lithium-ion Battery Number of Batteries: 1 Maximum External Dimensions: Microphone (Transmitter): (approx.) W30.6 x H67.6 x D19mm Receiver: (approx.) W34 x H28.7 x D53mm Weight: Microphone (Transmitter): 27g Receiver: 28g *Power may not be supplied depending on the camera you are using. Please check the product page for compatible models. Manufacturer's Warranty Period: 1 year