Released in June 2021/*The infrared laser emitted from this product is basically safe, but it may be dangerous to look at the laser beam using optical means (loupe, telescope, etc.). Please check the instruction manual when handling to avoid looking directly into the laser beam.
◆Equipped with a new function (Dual LOCKED ON QUAKE) that notifies you of the measurement with a sign and vibration
◆Built-in magnet on the side of the body
◆G mode (addition/subtraction distance & straight line distance) and D mode (straight line distance) Equipped with 2 modes of distance) / [LCS50I] LCS50I Released in June 2021 Even in difficult-to-understand scenes, you can rest assured with the LOCKED ON function. When you measure the distance to the pin flag in front of you, a sign lights up in the finder and the main unit vibrates to notify you. *During single measurement, when overlapping targets are detected and the distance to the nearest target is displayed, the LOCKED ON sign lights up and the main unit vibrates. During continuous measurement, the LOCKED ON sign lights up and the main unit vibrates when the distance display changes to a distance closer than the displayed distance.
◆ Built-in magnet on the side of the body Can be carried by attaching it temporarily to the magnetic metal of a golf club, such as the metal frame of a golf cart or an iron head. *When attaching to magnetic metal using the built-in magnet of the main unit, please make sure that it is firmly fixed. It may fall due to vibration or impact. *Please do not use this product if you are using a medical device such as a cardiac pacemaker. Doing so may cause malfunction of medical equipment or accidents.
◆ Equipped with 2 modes: G mode (addition/subtraction distance & straight line distance) and D mode (straight line distance) Equipped with "D mode" (displays only straight line distance) that can be used in competitions and ID Technology, it can be used on courses with ups and downs. Equipped with two measurement modes: ``G mode'' (in addition to straight line distance, addition and subtraction distance, which is horizontal distance ± height, is displayed) that also displays a guideline for the distance to hit based on the height difference. You can easily switch between the two modes with a single push of the MODE button.
◆When set to D mode (straight distance), the straight line mode sign flashes When set to D mode (straight distance), the straight line mode sign flashes. It can be safely used in competitions as it can be proven from the appearance that the tilt function is not used. *The straight line mode sign cannot be turned off when in D mode. When using it in a competition, please check the local rules of each competition beforehand.
◆Using OLED, the red internal display is easy to see in any scene.The brightness of the display can be adjusted in 5 levels to make it easy to see, depending on the surrounding brightness.
◆"ID TECHNOLOGY" that displays a guideline for the distance to hit based on the difference in elevation If the model is equipped with ID TECHNOLOGY, it can read the slope of the "launch" or "downhill" course and display the guideline for the distance to hit (additional/subtractive distance). = horizontal distance ± height). Even on undulating courses where it's hard to get a sense of distance, you won't have to misread the height differences and have no trouble choosing a club.
◆ Equipped with a "short distance priority algorithm" that preferentially displays the distance of nearby targets By being equipped with a "short distance priority algorithm", if the laser hits multiple targets, the closest distance will be displayed. will be displayed. When aiming for the pin flag with an approach shot, it is easy to measure the distance to the pin flag in front.
◆Continuous measurement function allows continuous measurement for about 8 seconds By holding down the button, you can continuously measure the distance to the target for about 8 seconds and display the measurement results continuously.
◆Bright 6x viewfinder and long eye relief design for easy viewing The 6x finder with multilayer coating provides a bright and clear view. In addition, the large eyepiece diameter makes it easy to see through, and the long eye relief design allows for easy viewing and a wide field of view even when wearing glasses.
◆Waterproof structure for daily life that is safe even in rainy weather.The waterproof structure for daily life is equivalent to JIS/IEC protection grade 4 (IPX4) (according to Nikon Vision test conditions), which prevents water from entering the interior even if it gets wet in the rain. Prevent. *Due to raindrops, the distance to the target may not be measured correctly. [Accessories] Semi-hard case for COOLSHOT Battery cover for CGFLRF Screw type ■Specifications ■Measurement range: 5-1090m/6-1200yd.Measurement accuracy (linear distance)...±1 m/yd. (less than 100m/yd.)± 2 m/yd. (100 m/yd. or more, less than 1000 m/yd.) ±0.5% m/yd. (1000 m/yd. or more) Display step: Straight line distance (upper row): 1 m/yd. unit Straight line distance ( Lower row): 0.5m/yd. unit (less than 1000m/yd.) 1m/yd. (over 1000m/yd.) Addition/subtraction distance (lower row): 0.2m/yd. unit 1m/yd. (over 1000m/yd.) Magnification: 6x Objective lens effective diameter: 22mm Actual field of view: 6.0° Pupil diameter: 3.7mm Eye relief: 17mm Size (length x height x width): 100mm x 75mm x 38mm Mass (weight): Approx. 175g ( (excluding batteries) Power supply: CR2 lithium battery x 1 (DC3V), with auto power-off function (approximately 8 seconds) Waterproof structure: Waterproof for daily life *Equivalent to JIS/IEC protection class 4 (IPX4) (according to Nikon Vision test conditions) ). We do not guarantee no damage or failure under all conditions. Radio wave standard: FCC Part15 SubpartB class B EU:EMC directive AS/NZS VCCI class B CU TR 020 ICES-003 Laser standard...IEC60825-1:Class 1M/Laser ProductFDA/21 CFR Part 1040.10:Class I Laser Product□*This product The infrared laser emitted from the camera is basically safe, but looking into the laser beam using optical means (loupe, telescope, etc.) may be dangerous. Please check the instruction manual when handling to avoid looking directly into the laser beam. Manufacturer warranty period 1 year