82 MH-165… Overall length (m): 1.65 Number of joints (pieces): 2 Finished (cm): 86 Own weight (g): 83 Tip diameter / base diameter (mm): 2.8 (0.7) /10.9 Weight load (No.) : 25-50 Applicable clamp size: SS Carbon content (%): 90 * The tip diameter is the closest to the rod tip, the outer diameter without parts and spools, and the inside in () is the outer diameter of the material tip. Accessories: Chloroprene rod belt, rod bag, / Rod for ship flounder with high sensitivity that resonates at hand and operability that can be sharply pierced ◆ Pursuing high sensitivity unique to metal. High-sensitivity design that clearly conveys a keen and very slight Atari. By reducing twisting with the "X45" structure, it has a high level of operability and stickiness. Larger flounder can be easily taken in. In addition, the lightweight and sharp tone enables precise control of small thrusts, and it is easy to aim for catch-up. A high-performance dedicated rod that is active in a wide range of boat flatfish fishing scenes, from the style of fishing while enjoying each piece carefully to the tournament scene where multi-point fishing techniques are required. Features by item 82: Pursuing operability and balance that enables suppleness and rhythmic small thrusts to put flatfish on. A standard model that can be used in any scene. DAIWA TECHNOLOGY… ■ Metal top, ■ Tip AGS (air guide system), ■ X45, ■ Air sensor sheet ◆ Metal top Precautions for use 1: About temperature change of metal top. Due to the characteristics of the material of superelastic titanium alloy, the elasticity of the superelastic titanium alloy decreases in a low temperature environment of 5 ° C or less, and the return of the tip of the tip becomes slow. Due to the extreme cold in the early morning and at night and the influence of the wind, a noticeable bend may occur. Furthermore, in an environment of 0 degrees or less, the decrease in elasticity progresses further, causing a phenomenon in which the tips remain bent and do not return. In either case, if the temperature rises, it will return to its original superelasticity and can be used normally. 2: Please avoid using it that causes excessive bending. The metal top can be used comfortably in normal operation, but excessive bending due to external factors such as entanglement and thread entanglement at the tip may leave habit (plastic deformation) or damage due to metal fatigue. there is. 3: In the unlikely event that you have a habit, you can correct it by hand. If a habit remains as in 2, you can correct it by slowly bending it in the direction opposite to the curved side. However, repeated correction of habits may cause metal fatigue, so avoid operations that leave habits such as entanglement. * The images of the products shown are representative images. Also, the color may look different from the actual product. Please be forewarned.

Tags:

Fishing Rods