Plastic model kit that requires assembly and painting
Tools, paint, etc. are required separately.

Product introduction Product introduction Product introduction The battleship Musashi, which was a symbol of the Combined Fleet along with Yamato, reappeared with the addition and specification change of 25mm triple machine gun parts of precise modeling The product is an unpainted kit that requires adhesive assembly and painting.
The scale is 1/700, and it is an offshore model that does not include the bottom of the ship.
It is a product using a conventional (special series) mold.
Battleship Musashi is the second ship of the last ship type "Yamato type"
designed and built by the Japanese Navy, and was completed in August 1942, the year after the start of the war, at the Kure Naval Arsenal.
Equipped with nine 46-centimeter guns, the largest in the world, and a displacement of 64,000 tons, it was an unprecedented ship.
Transferred to the Combined Fleet on the same day as completion.
Aircraft were becoming the mainstay of the era, and Musashi was undergoing refurbishment to strengthen its anti-aircraft armament, making sorties in the Battle of Mariana and Leyte Gulf.
In October 1944, the U.S. forces landed on the island of Hishima, and participated in the Sho Ichigo operation (Battle of Leyte Gulf) as a member of the combined fleet, including Yamato and Nagato, but was sunk in the Sibuyan Sea by an air attack. Did

-The product is modeled after the completion of construction in August 1942 and around October when the remaining construction was completed.
・An era when the high-angle guns were not reinforced with four secondary guns on both sides.
・ Equipped with No. 21 electric probe installed immediately after completion on top of the bridge 15m rangefinder

-The hull is composed of a single port and port side and the upper wooden deck.
- The wooden deck is a convex mold expression
・Parts molding color including hull and bottom plate is gray
・The bridge and chimney are left and right laminated.

- A figure equipped mainly with weapons for the purpose of fleet battles at the time of completion - The main gun integrates the gun barrel and canvas, and the elevation angle is fixed at the locking position.
- Four secondary guns are mounted on the ship, and the turret and barrel are integrated parts.
・The 25mm 3-barreled machine gun (without shield) comes with conventional molded parts and precision-molded mold parts used in 2018, which can be selected.
・Two types of barrel elevation angles for the shielded 25mm triple machine gun can be selected: high elevation angle and locking position.
-There are two types of ship-borne water reconnaissance aircraft, a zero-type observation aircraft and a zero-type (three-seat) water reconnaissance aircraft, and two of each are included.
・The molded color of the carrier-based aircraft is gray.

・ 3 types of decals included
・ Decals that include the warship flag, the rising sun flag, and the markings of the carrier-based aircraft
・Three sizes are available for warship flags, etc.
Includes 1/700 scale 10th, 6th, and 3rd widths of the real thing.
・Includes the Hinomaru of carrier-based aircraft, the ally identification belt (yellow belt), etc.
・Decals that include draft notation, chrysanthemum crest on the bow, and ship name notation on the stern (two types: gold and warship-colored)
・Decals recorded so that the walking belt on the aerial work deck at the rear of the ship can be easily expressed.
Molded parts are made up of two colors, gray and transparent.
220 assembly parts [Attached contents] ・Runner x19 ・Assembly manual x1 ・Decal x3 *This product is made in Japan.
*This product is a plastic model kit that requires assembly.
No safety warning No safety warning No safety warning
Dimensions : ‎41 x 15 x 6 cm


Tags:

FUJIMI   Plastic model   Scale model   Japanese battleship Yamato   Imperial Japanese Navy   1:700 scale   Japanese battleship Musashi   船・潜水艦   Light blue   Fujimi Japanese Navy Battleship Musashi   Fujimi 1/700 Japanese Battleship Musashi