USA: Friday, Nov 6 ~
Australia: Sunday, Nov 8 ~
Asia: Friday, Nov 6
UAE: Saturday, Nov 7
Order within 0 Hours 45 mins with Scheduled Delivery. If you place an order within this time, We will ship on Wednesday, Nov 4 2026 This delivery time is calculated by DHL and FedEx. You can check the exact delivery date on checkout page.
Reembolso total se não for genuíno. Reembolso total ou parcial, se o novo item não for como descrito.
Protecção do Comprador
Nenhuma avaliacao sobre este item...
Separate tools required
It is a product that uses a conventional (special series) mold.
The scale is 1/700, and it is an offshore model that does not include the bottom of the ship.
Product introduction New light cruiser in the non-convention era ~ Appeared as a selection specification at the final time of the sortie with Yamato and at the time of 1945 The light cruiser "Yahagi"
was the third Agano type ship in December 1941 during the war. Completed at the arsenal
The Agano type is planned as a flagship of the Destroyer Squadron, and features a modern appearance and armament that sets it apart from the previous 5,500 ton type.
The main gun was equipped with three 15 cm twin guns and two newly developed long 8 cm twin high angle guns.
After completion, Yahagi participated in the Battle of the Philippine Sea, the Battle of Leyte Gulf, and major battles.
In the meantime, anti-aircraft weapons were strengthened.
In April 1945, due to Operation Tenichi corresponding to the U.S. forces that landed in Okinawa, they set sail as the flagship of the 2nd Destroyer Squadron to escort battleship Yamato. In response to the above, he died on the way to Okinawa
・ Products can be selected from multiple annual states
・ Equipped with 28 25mm single machine guns in the final appearance of a sortie to Okinawa with Yamato by Operation Tenichi in April 1945.
・ After the Battle of the Philippine Sea from the end of June 1945, 18 25 mm single machine guns were installed, before the shape of the aviation work deck was changed.
・ It is said that the single machine gun was not strengthened during the Battle of the Philippine Sea in June 1945.
・ Type 96 25mm machine gun (triple / single) can be selected from 2 types of quality parts.
-Precision shape with separate parts for the barrel and pedestal, a structure that makes it easy to paint separately
-The molding color is gray for the gantry and gun metallic for the barrel, so color-coded expression is possible without painting.
-A design that fits in the adhesive position by combining the gantry and the barrel runner, and cuts the gate after using the pouring adhesive.
・ The bulletproof plate of the triple machine gun is also a separate part, making it possible to make it even more precise.
・ The other type contains a conventional integrally molded type.
-Reproduce the modern Agano-type shape, which is different from the flow of Japanese light cruisers until then.
-The hull is a left-right bonding type, and the portholes are closed and the number is reduced compared to when it was completed.
-The port side electric circuit that runs all around the side is a delicate sculpture that even expresses the fastener part.
-On the deck and each layer of the bridge, the holding metal fittings that express the linoleum floor and the non-slip iron deck are expressed with sharp sculptures.
・ The shelter part in front of the bridge is integrated into parts using a slide mold.
For detailed engraving and modeling on the side wall
-The main turret is a slide mold that reproduces windows, rattal, and steel plate seams on the sides and top.
-Realistic modeling with the grid at the top of the chimney removed, and the internal rectifying plate is also three-dimensional with separate parts
-The chimney is a left-right bonding type, and the monkey rattal is also engraved.
Each steam pipe is an independent part and expresses the difference from the sister ship.
・ The triangular pyramid truss at the bottom of the mast is pulled out using a slide mold.
-Small cranes on both sides of the rear end of the aviation work deck are reproduced three-dimensionally and accurately with separate parts.
・ The 4.5-meter high-angle rangefinding telemeter accurately shapes the columnar arm shape or is enclosed as a dedicated part.
・ No. 22 electric probe, gangway (storage), direction finder antenna, auxiliary wing storage, etc. are all made into separate parts. Recording
・ The water reconnaissance crane reproduces even the light holes on the side to improve the sense of precision.
・ Two zero-type (three-seater) seaplanes are included in the onboard seaplane.
Molding color is gray
-Two types of attached decals-Two types of attached decals that include the warship flag, the sun flag, and the markings of the carrier-based aircraft
・ Three sizes of warship flags are available
Includes 1/700 scale dimensions of the actual 10 width, 6 width, and 3 width
・ The Hinomaru of the carrier-based aircraft, the identification band (yellow band), etc. are recorded, and the Hinomaru includes those without a white border in the latter half of the war.
-Decals containing draft notation, chrysanthemum flower emblem on the bow, and ship name notation on the stern (two types, gold and warship color painting)
・ Prepare and enclose parts that correspond to the annual changes of Yahagi
・ The support tube of the high-angle rangefinding telemeter is made into a separate part in response to the change in shape between 1945 and 1945.
・ The aviation work deck is a dedicated part that corresponds to the shape of the opening and corresponds to two types of yearly differences.
-The deck near the stern has two types of special parts to reproduce the appearance of different accessories depending on the year.
・ Two types of davits on both sides of the bridge are available for deployment and storage.
The former is for 1945 and is used when the ship-mounted boat is not unloaded.
-Reproduce the characteristics of the third ship Yahagi, which is different from the sister ship
・ The bridge is made exclusively for Yahagi so that the shape difference can be clearly reproduced.
・ Unlike the scent of sake, the main gun canopy has a special part with a small aiming hand window on the front left of the canopy.
The molded parts are composed of three colors, gray, transparent, and gun metallic, which imitate the color of Kure Naval Arsenal.
208 parts to assemble (in the case of 1945) [Attachments] Runner x29
・ Assembly manual x1
・ Decal x2 * This product is made in Japan.
* This product is a plastic model kit that requires assembly.
No safety warning
Tags:
FUJIMI Black Grey Fujimi Mokei Imperial Japanese Navy Destroyer Agano-class cruiser Shiratsuyu-class destroyer Japanese destroyer Yukikaze Ships submarines Japanese destroyer Shigure