■Features The Defi-Link ADVANCE Control Unit SE is a product necessary for operating the meters and displays of the ADVANCE system. All settings and operations of the ADVANCE system are performed using this ADVANCE Control Unit SE. ■Search Keywords Unit Fuel pressure Turbo Sensor Meter Display Up to 7 units can be connected Night illumination The Defi-Link ADVANCE Control Unit SE is a product necessary for operating the meters and displays of the ADVANCE system. All settings and operations of the ADVANCE system are performed using this ADVANCE Control Unit SE. Differences from the previous model Previous model Current model DF07701 DF07703 DF17701 DF17703 Appearance Unit body color Black Black [Limited quantity] Sakura Pink Function 3 minute memory (recording) and playback possible Not possible Clock display when ADVANCE FD/ZD is connected ZD only possible Not possible Oil pressure warning buzzer can be stopped Not possible Possible Illumination pulse input support Not possible Possible ■ About stopping the oil pressure warning buzzer In the DF177 series, if the oil pressure warning setting is set to 0kPa, the buzzer will not sound even if the oil pressure becomes 0kPa during idling stop etc. ■ About illumination pulse input support In vehicles equipped with illumination control (vehicles in which the illumination signal is pulse controlled, such as European cars), the lighting would not function properly in the DF077 series unless the ADVANCE CAN Driver (DF156 series) was used in conjunction with it, but in the DF177 series the illumination control signal can be input as the illumination on/off signal.
・This is the Defi-Link ADVANCE control unit, DF17703, from Defi.
・This unit is necessary for the operation of Defi's Link Meter ADVANCE CR series, ADVANCE BF series, ADVANCE A1 series, and ADVANCE ZD series.
・Up to 7 ADVANCE series products can be connected to this control unit, enabling centralized operation. Please refer to the diagram at the bottom of the page for detailed system configuration.
・The illumination color when the Link Meter is running and the special effects when the ignition is turned ON/OFF can also be switched with this product. By setting your favorite color and operation, you can get a level of satisfaction that the genuine product does not offer.
・Warning values ​​can be set to any value for 9 items: Turbo 2.0/Turbo 1.2/Intake Manifold/Tachometer/Oil Pressure/Fuel Pressure/Oil Temperature/Water Temperature/Exhaust Temperature. When the set value is reached, a warning LED (red) and a buzzer will sound, so you can immediately detect any abnormality in your car. (The buzzer sound can be switched ON/OFF.)
・The switch section is equipped with a white backlight, which illuminates clearly as shown in the photo on the left, making it easy to operate at night.
・If a turbo meter and fuel pressure meter are installed, the fuel pressure meter can display not only the fuel pressure but also the differential pressure with the intake manifold pressure.
*Meters with the same display (model) cannot be connected at the same time. (Example: Connecting two turbo meters) [Components/Accessories] Advance control unit SE x 1 Switch unit (harness: 1.5m) x 1 Power harness (1m) x 1 Meter harness (2m) x 1 Double-sided tape x 1 Cable tie x 2 Electro-tap x 4 Pitac x 1 Hex nut x 4 Screw x 4 Start guide x 1 Warranty card x 1 Click here to check compatibility
*The manufacturer's page will open in a new tab. Please check from "Applicable vehicle search" in "Installation information", or contact us and we will check for you. Our Recommended Optional Accessories (Sold Separately) ●Fitting Kit: DF09501 Necessary to install the meter in any desired location, such as the A-pillar or steering column. (Screw-on type, drilling required) ●Advance Indicator: DF09601 Lights up in conjunction with the warning of the ADVANCE series. Makes it easier to notice warnings visually, thus preventing engine trouble. ●Single Meter Visor: DF11201 (for φ60) A visor that prevents the meter from becoming difficult to see in sunlight during the day and prevents the light from reflecting onto the windshield at night. ●Regular Position Bezel: A ring that fits into the front of various meters. The ▼ mark can be set to any scale, and there are various ways to use it, such as matching it to the warning value of various meters. (Compatible products differ depending on the meter and its size.) ●Stickers/Emblems: Stickers and carbon emblems of various Defi logo marks. An essential item for total customization of your car with Defi products. Precautions
・The Defi-Link ADVANCE SYSTEM cannot be connected to Defi-Link SYSTEM products. They are also not compatible. Only the sensors other than the turbo sensor are common, but the sensor harnesses are different, so a sensor harness for the Defi-Link ADVANCE SYSTEM is required.
・When using, please prepare a separately sold ADVANCE series meter or display. For details, please refer to the instruction manual on the manufacturer's website.
・For 12V vehicles only. Cannot be installed on 24V vehicles.
・Engine speed cannot be displayed in diesel vehicles.
・Cannot be installed on modified vehicles.
・May not be compatible with some foreign cars.
Product Category: Claire Online Shop Parts Meters Other Cars, Motorcycles, Bicycles Automotive Instruments Other Instruments
JAN/ISBN Code: 4997629177038
Product Code: defi-df17703

Tags:

Meter