USA: Monday, Nov 9
Australia: Wednesday, Nov 11
Asia: Tuesday, Nov 10
UAE: Tuesday, Nov 10
Order within 22 Hours 53 mins with Scheduled Delivery. If you place an order within this time, We will ship on Monday, Nov 9 2026. This delivery time is calculated by DHL & Fedex. You can check the exact delivery date on checkout page.
Buyer Protection
Full refund if not genuine. Full or partial refund, if the new item is not as described.
No reviews on this item...
・PowerCon X achieves a smooth power increase by optimally controlling the vehicle's boost pressure (turbocharged vehicles) and air flow sensor voltage (naturally aspirated/hybrid vehicles).
・With a completely plug-and-play design, no wiring work for power supplies, etc., is required. It can be easily installed as it is completed within the engine compartment.
・The main unit is equipped with a changeover switch. In addition to "Mode 2," which achieves increased output as with conventional products, a new "Mode 1" has been added that achieves a milder output by reducing the ratio by half. Furthermore, returning to the normal state, which previously required disconnecting the coupler, can now be done with just a switch operation. ■Search terms: Electronics, Custom Parts, X, NV100 Clipper DR17V, NV100 Clipper Rio DR17W, Scrum Wagon DG17W, Flair Custom Style MJ44S, Flair Crossover MS52S, Flair Wagon Custom Style, Flair Wagon Tough Style MM53S, Town Box DS17W, Minicab Van DS17V, Alto Works HA36S, Every DA17V, Every Wagon DA17W, Spacia Custom, Spacia Gear MK53S MK54S, Hustler MR31S MR41S MR52S, Wagon R Custom Z, Wagon R Stingray MH55S Differences between Power Con (conventional model) and Power Con X (new model) ◎ The main unit has an "OFF/Mode 1/Mode 2" switch on the side! In addition to "Mode 2," which achieves the same output improvement as conventional products, a new "Mode 1" has been added that achieves a milder output by reducing the ratio to approximately half (
*). Furthermore, returning to normal mode, which required disconnecting the coupler with conventional Power Con products, can now be done with a switch. ◎ The product lineup for NA and turbo has been unified, improving ease of selection and understanding.
* Even with a control ratio of approximately half, the increase in power and torque may not be halved depending on the vehicle. Compatibility Information
* Please be sure to check the compatible vehicle information from the above PDF data before purchasing.
* The above PDF data is information provided by the manufacturer. Power Check Data
* Example of power check graph: Fairlady Z RZ34 [Mode 2] Maximum output difference 49.6 PS / Maximum torque difference 70.1 Nm Up! [Mode 1] Maximum output difference 30.6 PS / Maximum torque difference 44.2 Nm Up!
*The power and torque values in the compatibility chart and graph are measured using a BLITZ chassis dynamometer and represent the output measurements of a normal vehicle and the output measurements with PowerCon X installed.
*Output values may vary depending on individual vehicle differences, etc. Please note that these are for reference only.
・BLITZ's power controller PowerCon X, PCX05. ■Features of PowerCon X
・PowerCon X achieves smooth power increases by optimally controlling the vehicle's boost pressure (turbo vehicles) and air flow sensor voltage (NA/hybrid vehicles).
・Compatible with a wide range of vehicles, from sports cars to minivans, SUVs, and K-cars, totaling over 190 models.
・Developed and set for each vehicle model. By presetting dedicated ratios, power increases are performed within the control range of the genuine ECU, minimizing the burden on the vehicle.
・Completely plug-and-play design, no wiring work for power supply, etc. is required. It is completed in the engine compartment and can be easily installed.
・The main unit is equipped with a toggle switch. In addition to "Mode 2," which achieves increased output as with conventional products, a new "Mode 1" has been added that achieves milder output by reducing the ratio by half. Furthermore, returning to the normal state, which previously required removing the coupler, can now be done with just a switch operation.
・All short parts necessary for installation are included.
Product Category: Claire Online Shop Parts Electronic Parts Power Controller Car, Motorcycle, Bicycle Automotive Electronic Parts Throttle Controller
JAN/ISBN Code: 4959094157465
Product Code: blitz-pcx05
Tags:
Toyota Car Turbocharger Toyota Alphard Blitz RHDJapan Continuously Variable Transmission BLITZ Power Cons NA GR86 BRZ ZN8 ZD8 Power Con NA Coupler On Connection Power Up BPCN02 Anodized Red BLITZ ブリッツ パワコンX アトレー S700V S710V R3.12~ KF-VET CVT PCX25 Blitz Damper Zz R Damping Rate Extension Dial 07