Simply plug it in to turn your LED position lamps into daytime running lights! Tag 1: [SBT01577] / Tag 2: [SBT01565] / Tag 3: [SBT01625] / Tag 4: [SBT01637] / Tag 5: [SBT01673] / Tag 6: [SBT01685] / Tag 7: [SBT01709] / Tag 8: [SBT02125]
*All photos used on this page are for illustrative purposes only. Main compatible vehicle models Manufacturer Vehicle BMW
*Vehicles equipped with BMW Navigation System (iDrive) (excluding vehicles with daytime running lights as standard equipment) 1 Series (F20) 2 Series (F22/F23/F87/F45/F46)
*2 3 Series (F30/F31/F34/F80) 4 Series (F32/F33/F36/F82)
*2 5 Series (F10/F11/F07)
・(G30/G31)
*1 6 Series (F12/F13/F06)
*2
・(G32)
*1 7 Series (F01/F02/F04)
・(G11/G12)
*1 X1 (F48) X3 (F25) X4 (F26) X5 (F15)
・X5 M(F85)X6 (F16)
・X6 M(F86)i3 (I01)i8 (I12/I15)
※2◎This product will change the genuine LED position lamps to European specification daytime running lights. When the small lamps or turn signals are on, the dimming
and turning-off patterns will differ depending on the vehicle model. (The small lamp lighting pattern is the same as the genuine product)
※For the above compatible vehicles, PLUG DRC+ is compatible as the update makes daytime running lights standard equipment. An ON/OFF item for the daytime running light function will be added to the vehicle setting menu, so you will be able to turn it ON/OFF as you wish.
※1 Vehicles with model code "Gxx" will only have the daytime running light function. (One-touch door mirror folding is standard equipment)
※2 For vehicles that do not have a mirror folding function at the door handle, one-touch door mirror folding at the door handle cannot be used. Only the key can be used. The above compatibility information is as of June 2024. Compatibility may change due to minor model changes, etc. For the latest information, please check the manufacturer's website or contact our store and we will look into it for you.
・This is the PLUG DRL+ OBD Daytime Running Light Controller series [for BMW], PL3-DRL-B001 from CodeTech.
・It changes the genuine LED position lamps to daytime running lights and folds the door mirrors with a single touch when the door locks up.
・Coding for the above two items is possible, but you can also install only one item depending on your preference.
・Plug it into the vehicle's OBDII port, and coding is complete when the lamp changes from blinking green to solid yellow. To revert to the original settings, plug it in again, and coding is complete when the lamp changes from blinking green to solid blue.
・The main unit case has a built-in DIP switch and a recovery mode, so you can return the vehicle to its state before this product was plugged in.
・It is managed by the vehicle identification number, so it cannot be used on other vehicles.
・This product is made in Japan and comes with a 1-year manufacturer's warranty.
* Normally, pressing and holding the vehicle key or door lock button (including comfort access) will fold the door mirrors, but now the mirrors will fold almost simultaneously with locking the doors. (Depending on the vehicle, you may need to press and hold a little longer.)
* For vehicles where the ON/OFF option for daytime running lights appears in the vehicle settings screen, please also check on the screen. If the daytime running lights are not enabled, turn the key OFF once, wait for about 30 seconds, and then repeat from step 1.
* After installing PLUG DRL+, your previously set memory may be reset, so please reconfigure as needed.
* Depending on the vehicle, the daytime running lights may not illuminate immediately after installation. In that case, a daytime running light item will be added to the vehicle settings screen, and the daytime running lights will not illuminate unless the checkbox is unchecked by default, so please check and confirm that the daytime running lights illuminate.
* After installing this product, the ambient lights may temporarily not illuminate, or the ETC may temporarily not work, and other electrical systems may be temporarily unavailable. In that case, lock the vehicle doors, leave the vehicle in deep sleep mode (completely powered off), and then unlock the doors to reset and return to the original state. This is a specification of the vehicle's computer.
Product Category: Claire Online Shop Parts Electronic Parts Controllers Cars, Motorcycles, Bicycles Automotive Lights, Lenses Other Lights
JAN/ISBN Code: 4573203480666
Product Code: codetech-pl3-drl-b001

Tags:

Computer   Data   Input   Digital pen   Input device   Output device   Input/output   IBM