Product Information Manufacturer: TEIN
Product Name: FLEX Z
Manufacturer Part Number: VSS52-C1SS4
JAN Code: 4582202760693
Automaker: Subaru
Model: Legacy Touring Wagon Model Number: BP5
Year: 2003/05~2009/04
Drive: 4WD
Fit Details: Engine: 2000
Grade: 2.0R/2.0I
Specifications: Springs Included: Yes EDFC Compatible: Yes Damping Force Adjustment (F/R): Yes/Yes Overall Length Adjustment (F/R): Yes/Yes Mount (F/R): Camber Adjustable (Pillow Ball Upper Mount Included)/Reinforced Rubber Mount Included Standard Ride Height Relative to Genuine Part mm (F/R): -35/-35 Ride Height Adjustment Range Relative to Genuine Part mm (F/R) Maximum (Lower Limit to Upper Limit): -87 to +6 / -93 to -13 Ride Height Adjustment Range Relative to Stock mm (F/R) Recommended (Lower Limit to Upper Limit): -45 to -25 / -45 to -25 Spring Rate Kgf/mm (F/R): 6.0 / 7.0 Free Length mm (F/R): 200 / 200 Inner Diameter mm (F/R): φ70 / φ70
Remarks
・Notes: Please be sure to check the PC page.
Set contents: Product + alignment measurement and adjustment + installation labor Manufacturer name TEIN Product name FLEX Z Manufacturer part number VSS52-C1SS4
JAN code 4582202760693 Car manufacturer Subaru Model Legacy Touring Wagon Model BP5 Year 2003/05~2009/04 Drive 4WD Fit details Engine: 2000
Grade: 2.0R/2.0I Specifications Springs included: Yes EDFC compatible: Yes Damping force adjustment (F/R): Yes/Yes Overall length adjustment (F/R): Yes/Yes Mount (F/R): Camber adjustable (pillow ball upper mount included)/Reinforced rubber mount included Standard ride height relative to genuine mm (F/R): -35/-35 Ride height adjustment range relative to genuine mm (F/R) Maximum (lower limit to upper limit): -87 to +6/-93 to -13 Ride height adjustment range relative to genuine mm (F/R) Recommended (Lower Limit ~ Upper Limit): -45 to -25 / -45 to -25 Spring Rate Kgf/mm (F/R): 6.0 / 7.0 Free Length mm (F/R): 200 / 200 Inner Diameter mm (F/R): φ70 / φ70
Remarks
Do not use the rear case length above the standard value. When raising the rear ride height, adjust with the spring seat. You will need to remove the interior stay located on the top of the mount. Luggage fixing hooks cannot be used. The values ​​are calculated relative to the normal ride height. Recommended ride height adjustment range: These are values ​​confirmed by the manufacturer during installation. Precautions The ride height data is reference measurement data from development vehicles, so there may be differences depending on individual vehicle differences and assembly conditions. (Also, there may be differences between the left and right sides, and the ride height may decrease after some time has passed since assembly due to settling.) Using outside the recommended ride height adjustment range may cause damage to the shocks or the vehicle, and may result in non-compliance with safety standards. In such cases, the manufacturer will not be held responsible for any damage. Depending on the wheel size, offset, tire brand, and size, interference may occur during driving even at the manufacturer's standard position. Set contents: Product + alignment measurement and adjustment + installation labor. JAN/ISBN code: 4582202760693 Product code: VSS52-C1SS4-qq-e-d-450

Tags:

Car   Mazda MX-5   Shock absorber   Car suspension   Coilover   TEIN   Ride height   Tein Vsm40-c1ss1   Tein Flex Z Coilover Kit Mazda MX-5 1.5 2015