Product Information Manufacturer: TEIN
Product Name: FLEX Z
Manufacturer Part Number: VSD52-C1AS3
JAN Code: 4582202762659
Automaker: Daihatsu
Model: Tanto Exe Model Number: L455S
Year: 2009/12~2014/10
Drive: FF
Compatibility Details: Engine: 660
Grade: X LIMITED/X/L
Specifications: Springs Included: Yes EDFC Compatible: Yes Damping Force Adjustment (F/R): Yes/Yes Overall Length Adjustment (F/R): Yes/- Mounts (F/R): Reinforced Rubber Mounts Included/Genuine Mounts Standard Ride Height Relative to Genuine mm (F/R): -60/-55 Ride Height Adjustment Range Relative to Genuine mm (F/R) Maximum (Lower Limit ~ Upper Limit): -97~-41/-83~-49 Ride Height Adjustment Range Relative to Genuine Recommended height in mm (F/R) (lower limit to upper limit): -70 to -50 / -65 to -49 Spring rate Kgf/mm (F/R): 5.0 / 2.4 Free length mm (F/R): 150 / 280 Inner diameter mm (F/R): φ70 / -

Remarks
: For vehicles equipped with fog lamps, if the lower edge of the fog lamp is less than 250 mm above the ground, it will violate safety standards, so please use it at a ride height that ensures 250 mm or more above the ground. The values ​​are calculated relative to the normal ride height. Recommended ride height adjustment range: These are values ​​confirmed by the manufacturer during installation.
Set contents: Product + alignment measurement and adjustment + installation labor Manufacturer name TEIN Product name FLEX Z Manufacturer part number VSD52-C1AS3
JAN code 4582202762659 Car manufacturer Daihatsu Model Tanto Exe Model L455S Year 2009/12~2014/10 Drive FF Fit details Engine: 660
Grade: X LIMITED/X/L Specifications Spring included: Yes EDFC compatible: Yes Damping force adjustment (F/R): ○/○ Overall length adjustment (F/R): ○/- Mount (F/R): Reinforced rubber mount included/Genuine mount Standard ride height relative to genuine mm (F/R): -60/-55 Ride height adjustment range relative to genuine mm (F/R) Maximum (lower limit to upper limit): -97 to -41/-83 to -49 Ride height adjustment range relative to genuine mm (F/R) Recommended (lower limit to upper limit): -70 to -50/-65 to -49 Spring rate Kgf/mm (F/R): 5.0/2.4 Free length mm (F/R): 150/280 Inner diameter mm (F/R): φ70/-
Remarks
For vehicles equipped with fog lamps, if the height of the lower edge of the fog lamp is less than 250 mm above the ground, it will violate safety standards, so please use it at a ride height that ensures a ground clearance of 250 mm or more. The values ​​are calculated relative to the normal ride height. Recommended ride height adjustment range: These are values ​​confirmed by the manufacturer during installation. Precautions The ride height data is reference measurement data from development vehicles, so there may be differences depending on individual vehicle differences and assembly conditions. (Also, there may be differences between the left and right sides, and the ride height may drop after some time has passed since assembly due to settling.) Using it outside the recommended ride height adjustment range may cause damage to the shocks or vehicle, and may result in non-compliance with safety standards. In such cases, the manufacturer will not be held responsible for any damage. Depending on the wheel size, offset, tire brand and size, etc., interference may occur during driving even at the manufacturer's standard position. Set contents: Product + alignment measurement and adjustment + installation labor charge
JAN/ISBN code: 4582202762659
Product code: VSD52-C1AS3-qq-e-d-527

Tags:

Mazda MX-5   Shock absorber   Car suspension   Coilover   TEIN   Ride height   Tein Vsm40-c1ss1   Tein VSP92-C1AS3   Tein VSB48-C1SS3