Product Information Manufacturer: TEIN/Tein
Product Name: MONO RACING
Manufacturer Part Number: VSU86-K1NS2
JAN Code: 4589533461213
Automaker: Suzuki
Model: Swift Model Number: ZC72S
Year: 2010.09~2016.11
Drive: FF
Fit Details: Engine: 1200
Grade: RS
Specifications: Please check the PC page for product details
Remarks
: Please check the PC page for product details. Precautions: Ride height data is reference measurement data from development vehicles, and may differ depending on individual vehicle differences and assembly conditions. (Also, there may be differences between the left and right sides, and the ride height may decrease after some time due to settling after assembly.) Using outside the recommended ride height adjustment range may cause damage to the shocks or vehicle, and may result in non-compliance with safety standards. Please note that the manufacturer will not be held responsible for any damage in such cases. Depending on the wheel size, offset, tire brand and size, etc., interference may occur during driving even at the manufacturer's standard position.
Set contents: Product + delivery Manufacturer name TEIN/Tein Product name MONO RACING Manufacturer Part Number VSU86-K1NS2
JAN Code 4589533461213 Car Manufacturer Suzuki Model Swift Model Number ZC72S Year 2010.09~2016.11 Drive FF Fit Details Engine: 1200
Grade: RS Specifications Spring Included: Yes EDFC Compatible: Yes Damping Force Adjustment (F/R): ○|○ Overall Length Adjustment (F/R): ○│○ Mount (F/R): Genuine Mount│Genuine Mount Standard Ride Height Relative to Genuine mm (F/R): -30│-40 Ride Height Adjustment Range Relative to Genuine mm (F/R) Maximum (Lower Limit to Upper Limit): -74 to -13│-61 to -15 Ride Height Adjustment Range Relative to Genuine mm (F/R) Recommended (Lower Limit to Upper Limit): -40 to -20│-50 to -30 Spring Rate Kgf/mm (F/R): 12.0│9.0 Free Length mm(F/R):135│180 Inner diameter mm(F/R):Φ70│-
Remarks
When using the camber adjustment collar in the positive position, if you want to change it to the positive direction, use part number: SPS12-R16110-30, and if you want to adjust it to the negative direction, use part number: SPS12-R16110-10.When using it in the negative position, if you want to change it to the positive direction, use part number: SPS12-R16110-10, and if you want to adjust it to the negative direction, use part number: SPS12-R16110-30. |Camber adjustment collars are available separately with different offsets. Four camber adjustment collars are required per vehicle. The included camber adjustment range is -3.8° to -1.1°. (This may vary depending on individual vehicle differences.) The values ​​are calculated relative to the normal ride height. Recommended ride height adjustment range: These are values ​​confirmed by the manufacturer during installation. Precautions: Ride height data is reference measurement data from development vehicles, so there may be differences depending on individual vehicle differences and assembly conditions. (Also, differences may occur between the left and right sides, and the ride height may decrease after some time following installation due to settling.) Using the product outside the recommended ride height adjustment range may cause damage to the shocks or the vehicle, and may result in non-compliance with safety standards. Please note that the manufacturer will not be held responsible for any damage in such cases. Depending on the wheel size, offset, tire brand and size, interference may occur during driving even at the manufacturer's standard position. Set contents: Product + shipping product
JAN/ISBN code: 4589533461213
Product code: TIN-qq-e-000001k

Tags:

Car   Sports car   Honda Civic Type R   Shock absorber   Car suspension   TEIN   テイン TEIN テイン 車高調 MONO RACING VSU86-K1NS2 スイフト スイフト スポーツ   Tein Flex Z Coilover Suspension Kit   Tein 2022+ Subaru/Toyota BRZ/GR86