Product Information Manufacturer: TEIN
Product Name: FLEX Z
Manufacturer Part Number: VSK24-C1AS3
JAN Code: 4582202760525
Automaker: Nissan
Vehicle Model: Elgrand Model Number: TNE52
Year: 2010/08~2013/06
Drive: 4WD
Compatibility Details: Engine: 2500
Grade: 250HIGHWAY STAR/250XG/RIDER
Specifications: Springs Included: Yes EDFC Compatible: Yes Damping Force Adjustment (F/R): Yes/Yes Overall Length Adjustment (F/R): Yes/Yes Mount (F/R): Reinforced Rubber Mount Included/Reinforced Rubber Mount Included Standard Ride Height Relative to Stock mm (F/R): -40/-40 Ride Height Adjustment Range Relative to Stock mm (F/R) Maximum (Lower Limit ~ Upper Limit): -64~-12/-71~-32 Ride Height Adjustment Range Relative to Stock Recommended spring rate in mm (F/R) (lower limit to upper limit): -50 to -30 / -50 to -32 Spring rate Kgf/mm (F/R): 7.0 / 11.5 Free length mm (F/R): 190 / 233 Inner diameter mm (F/R): - / -

Remarks
: Front damping force adjustment requires removal of the shock absorber. Rear damping force adjustment requires removal of the shock absorber. Due to the vehicle's structure, manual damping force adjustment is difficult, so simultaneous installation of the EDFC series is recommended. The values ​​are calculated relative to the normal ride height. Recommended ride height adjustment range: These are values ​​confirmed by the manufacturer during installation.
Set contents: Product + delivery Manufacturer name TEIN Product name FLEX Z Manufacturer part number VSK24-C1AS3
JAN code 4582202760525 Car manufacturer Nissan Car model Elgrand Model TNE52 Year 2010/08~2013/06 Drive 4WD Fit details Engine: 2500
Grade: 250HIGHWAY STAR/250XG/RIDER Specifications Spring included: Yes EDFC compatible: Yes Damping force adjustment (F/R): Yes/Yes Overall length adjustment (F/R): Yes/Yes Mount (F/R): Reinforced rubber mount included/Reinforced rubber mount included Standard ride height compared to genuine mm (F/R): -40/-40 Ride height adjustment range compared to genuine mm (F/R) Maximum (lower limit to upper limit): -64 to -12/-71 to -32 Ride height adjustment range compared to genuine mm (F/R) Recommended (lower limit to upper limit): -50 to -30/-50 to -32 Spring rate Kgf/mm (F/R): 7.0/11.5 Free length mm (F/R): 190/233 Inner diameter mm (F/R): -/-
Remarks
Front damping force adjustment requires removal of the shock absorber.Rear damping force adjustment requires removal of the shock absorber.Due to the vehicle's structure, manual damping force adjustment is difficult, so simultaneous installation of the EDFC series is recommended.Values ​​are calculated relative to the normal ride height.Recommended ride height adjustment range:Values ​​confirmed by the manufacturer during installation.PrecautionsRide height data is reference measurement data from development vehicles, so differences may occur due to individual vehicle differences and assembly conditions. (Also, differences may occur between the left and right sides, and the ride height may decrease after some time following installation due to settling.)Using outside the recommended ride height adjustment range may cause damage to the shocks or vehicle and may result in non-compliance with safety standards.Please note that the manufacturer will not be held responsible for any damage in such cases.Depending on the wheel size, offset, tire brand and size, interference may occur during driving even at the manufacturer's standard position. Set contents: Product + Delivery product
JAN/ISBN code: 4582202760525
Product code: VSK24-C1AS3-qq-e-50k

Tags:

Car   Honda Civic   Shock absorber   Car suspension   Toyota Prius   Tesla   Coilover   TEIN   Ride height