Product Information Manufacturer: TEIN
Product Name: RX1
Manufacturer Part Number: VSP12-M1AS3
JAN Code: 4589533492958
Automaker: Nissan
Vehicle Model: Elgrand Model Number: E51
Year: 2002/05~2010/07
Drive: FR
Compatibility Details: Engine: 3500
Grade: XL/X/VG/V/HIGHWAY STAR
Specifications: Springs Included: Yes EDFC Compatible: Yes Damping Force Adjustment (F/R): Yes/Yes Overall Length Adjustment (F/R): Yes/Yes Mount (F/R): Reinforced Rubber Mount Included/Reinforced Rubber Mount Included Standard Ride Height Relative to Stock mm (F/R): -30/-50 Ride Height Adjustment Range Relative to Stock mm (F/R) Maximum (Lower Limit ~ Upper Limit): -75~-8/-73~-34 Ride Height Adjustment Range Relative to Stock Recommended spring rate in mm (F/R) (lower limit to upper limit): -40 to -20 / -60 to -40 Spring rate Kgf/mm (F/R): 7.0 / 8.4 Free length mm (F/R): 200 / 289 Inner diameter mm (F/R): - / -

Remarks
: The amount of ride height reduction will differ when installed on Highway Star and Rider series. Rear damping force adjustment requires removal of the shock absorber. Due to the vehicle's structure, manual damping force adjustment is difficult, so simultaneous installation of the EDFC series is recommended. The values ​​are calculated relative to the normal ride height. Recommended ride height adjustment range: These are values ​​confirmed by the manufacturer during installation.
Set contents: Product + delivery Manufacturer name TEIN Product name RX1 Manufacturer part number VSP12-M1AS3
JAN code 4589533492958 Car manufacturer Nissan Car model Elgrand Model E51 Year 2002/05~2010/07 Drive FR Fit details Engine: 3500
Grade: XL/X/VG/V/HIGHWAY STAR Specifications Springs included: Yes EDFC compatible: Yes Damping force adjustment (F/R): Yes/Yes Overall length adjustment (F/R): Yes/Yes Mount (F/R): Reinforced rubber mount included/Reinforced rubber mount included Standard ride height compared to genuine mm (F/R): -30/-50 Ride height adjustment range compared to genuine mm (F/R) Maximum (lower limit to upper limit): -75 to -8/-73 to -34 Ride height adjustment range compared to genuine mm (F/R) Recommended (lower limit to upper limit): -40 to -20/-60 to -40 Spring rate Kgf/mm (F/R): 7.0/8.4 Free length mm (F/R): 200/289 Inner diameter mm (F/R): -/-
Remarks
When installed on Highway Star and Rider series, the amount of ride height reduction will differ. Rear damping force adjustment requires removal of the shock absorber. Due to the vehicle's structure, manual damping force adjustment is difficult, so simultaneous installation of the EDFC series is recommended. The values ​​are calculated relative to the normal ride height. Recommended ride height adjustment range: These are values ​​confirmed by the manufacturer during installation. Precautions The ride height data is reference measurement data from development vehicles, so there may be differences depending on individual vehicle differences and assembly conditions. (Also, there may be differences between the left and right sides, and the ride height may drop after some time has passed since assembly due to settling.) Using outside the recommended ride height adjustment range may cause damage to the shocks or vehicle, and may result in non-compliance with safety standards. The manufacturer will not be held responsible for any damage in such cases. Depending on the wheel size, offset, tire brand and size, etc., interference may occur during driving even at the manufacturer's standard position. Set contents: Product + Delivery product
JAN/ISBN code: 4589533492958
Product code: VSP12-M1AS3-qq-e-213k

Tags:

Car   Shock absorber   Tire   Car suspension   Toyota HiAce   Toyota LandCruiser Prado   TEIN   Air suspension   Toyota Pixis Epoch   Genb