Product Information Manufacturer: TEIN
Product Name: RX1
Manufacturer Part Number: VSC86-M1AS3
JAN Code: 4589533483222
Automaker: Toyota
Vehicle Model: Alphard Model Number: ANH25W
Year: 2008/05~2014/12
Drive: 4WD
Compatibility Details: Engine: 2400
Grade: 240S/240X/240G
Specifications: Springs Included: Yes EDFC Compatible: Yes Damping Force Adjustment (F/R): Yes/Yes Overall Length Adjustment (F/R): Yes/Yes Mount (F/R): Reinforced Rubber Mount Included/Genuine Mount Standard Ride Height Relative to Genuine mm (F/R): -35/-40 Ride Height Adjustment Range Relative to Genuine mm (F/R) Maximum (Lower Limit ~ Upper Limit): -79~+6/-67~-25 Ride Height Adjustment Range Relative to Genuine mm (F/R) Recommended (Lower Limit ~ Upper Limit): -45 to -25 / -50 to -30 Spring Rate Kgf/mm (F/R): 6.0 / 8.0 Free Length mm (F/R): 250 / 241 Inner Diameter mm (F/R): - / -

Remarks
: Rear: Modification of the genuine dust boot is required. Rear: When adjusting the ride height, the H.A.S. must be removed from the vehicle once. The values ​​are calculated relative to the normal ride height. Recommended ride height adjustment range: These are values ​​confirmed by the manufacturer during installation.
Set contents: Product + delivery Manufacturer name TEIN Product name RX1 Manufacturer part number VSC86-M1AS3
JAN code 4589533483222 Automobile manufacturer Toyota Model Alphard Model ANH25W Year 2008/05~2014/12 Drive 4WD Compatibility details Engine: 2400
Grade: 240S/240X/240G Specifications Springs included: Yes EDFC compatible: Yes Damping force adjustment (F/R): Yes/Yes Overall length adjustment (F/R): Yes/Yes Mount (F/R): Reinforced rubber mount included/Genuine mount Standard ride height relative to genuine mm (F/R): -35/-40 Ride height adjustment range relative to genuine mm (F/R) Maximum (lower limit to upper limit): -79 to +6/-67 to -25 Ride height adjustment range relative to genuine mm (F/R) Recommended (lower limit to upper limit): -45 to -25/-50 to -30 Spring rate Kgf/mm (F/R): 6.0/8.0 Free length mm (F/R): 250/241 Inner diameter mm (F/R): -/-
Remarks
Rear: Modification of the genuine dust boot is required.Rear: When adjusting the ride height, the H.A.S. must be removed from the vehicle once.The values ​​are calculated relative to the normal ride height.Recommended ride height adjustment range:These are values ​​confirmed by the manufacturer during installation.PrecautionsThe ride height data is reference measurement data from the development vehicle, so there may be differences depending on individual vehicle differences and assembly conditions. (Also, there may be differences between the left and right sides, or the ride height may drop after some time has passed since assembly due to settling.)Using it outside the recommended ride height adjustment range may cause damage to the shock absorber or the vehicle, and may result in non-compliance with safety standards.Please note that the manufacturer will not be held responsible for any damage in such cases.Depending on the wheel size, offset, tire brand and size, interference may occur during driving even at the manufacturer's standard position. Set contents: Product + Delivery product
JAN/ISBN code: 4589533483222
Product code: VSC86-M1AS3-qq-e-95k

Tags:

Car   Shock absorber   Toyota RAV4   Tire   Car suspension   Toyota HiAce   TEIN   Air suspension   Toyota Pixis Epoch   Genb