Product Information Manufacturer: TEIN/Tein
Product Name: FLEX Z
Manufacturer Part Number: VSBDQ-C1AS3
JAN Code: 4589533498219
Automaker: Honda
Model: ZR-V Model Number: RZ3
Year: 2023.04~
Drive: FF
Compatibility Details: Engine: 1500
Grade: X, Z
Specifications: Please check the PC page for product details
Remarks
: Please check the PC page for product details. Precautions: Ride height data is reference measurement data from development vehicles, and may differ depending on individual vehicle differences and assembly conditions. (Also, there may be differences between the left and right sides, and the ride height may decrease after some time due to settling after assembly.) Using outside the recommended ride height adjustment range may cause damage to the shocks or vehicle, and may result in non-compliance with safety standards. Please note that the manufacturer will not be held responsible for any damage in such cases. Depending on the wheel size, offset, tire brand, and size, interference may occur during driving even at the manufacturer's standard position.
Set contents: Product + delivery Manufacturer name TEIN/Tein Product name FLEX Z Manufacturer part number VSBDQ-C1AS3
JAN code 4589533498219 Automobile manufacturer Honda Model ZR-V Model RZ3 Year 2023.04~ Drive FF Compatibility details Engine: 1500
Grade: X・Z Specifications Spring included: Yes EDFC compatible: Yes Damping force adjustment (F/R): ○|○ Overall length adjustment (F/R): ○│○ Mount (F/R): Reinforced rubber mount included│Reinforced rubber mount included Standard ride height compared to genuine mm (F/R): -35│-40 Ride height adjustment range compared to genuine mm (F/R) Maximum (lower limit to upper limit): -52 to -6│-62 to -9 Ride height adjustment range compared to genuine mm (F/R) Recommended (lower limit to upper limit): -45 to -25│-50 to -30 Spring rate Kgf/mm (F/R): 7.0│6.0 Free length mm(F/R):190│237 Inner diameter mm(F/R):-│-
Remarks
Due to the vehicle's structure, manual damping force adjustment is difficult for the RR, so simultaneous installation of the EDFC series is recommended. The values ​​are calculated relative to the normal ride height. Recommended ride height adjustment range: These are values ​​confirmed by the manufacturer during installation. Precautions: Ride height data is reference measurement data from development vehicles, so differences may occur due to individual vehicle differences and assembly conditions. (Also, differences may occur between the left and right sides, and the ride height may decrease after some time following installation due to settling.) Using outside the recommended ride height adjustment range may cause damage to the shocks or vehicle, and may result in non-compliance with safety standards. Please note that the manufacturer will not be held responsible for any damage in such cases. Depending on the wheel size, offset, tire brand and size, etc., interference may occur during driving even at the manufacturer's standard position. Set contents: Product + delivery product
JAN/ISBN code: 4589533498219
Product code: TIN-qq-e-000370k

Tags:

Car   Honda Civic   Shock absorber   Car suspension   Toyota Prius   Tesla   Coilover   TEIN   Ride height