Product Information Manufacturer: TEIN
Product Name: FLEX Z
Manufacturer Part Number: VSTE0-C1AS3
JAN Code: 4582202763854
Automaker: Toyota
Model: C-HR GR Sport Model Number: ZYX11
Year: 2019/10~
Drive: FF
Fit Details: Engine: 1800
Grade: S GR SPORT
Specifications: Springs Included: Yes EDFC Compatible: Yes Damping Force Adjustment (F/R): Yes/Yes Overall Length Adjustment (F/R): Yes/- Mounts (F/R): Reinforced Rubber Mounts Included/Reinforced Rubber Mounts Included Standard Ride Height Relative to Stock mm (F/R): -30/-20 Ride Height Adjustment Range Relative to Stock mm (F/R) Maximum (Lower Limit ~ Upper Limit): -62~-2/-53~+6 Ride Height Adjustment Range Relative to Stock mm (F/R) Recommended (Lower Limit ~ Upper Limit): -40 to -20 / -30 to -10 Spring Rate Kgf/mm (F/R): 5.0 / 5.0 Free Length mm (F/R): 200 / 260 Inner Diameter mm (F/R): - / -

Remarks
: Front damping force adjustment requires removal of the shock absorber. Since manual damping force adjustment is difficult, simultaneous installation of the EDFC series is recommended. The values ​​are calculated relative to the normal ride height. Recommended ride height adjustment range: These are values ​​confirmed by the manufacturer during installation.
Set contents: Product + delivery Manufacturer name TEIN Product name FLEX Z Manufacturer part number VSTE0-C1AS3
JAN code 4582202763854 Car manufacturer Toyota Model C-HR GR Sport Model ZYX11 Year 2019/10~ Drive FF Fit details Engine: 1800
Grade: S GR SPORT Specifications Springs included: Yes EDFC compatible: Yes Damping force adjustment (F/R): ○/○ Overall length adjustment (F/R): ○/- Mount (F/R): Reinforced rubber mount included/Reinforced rubber mount included Standard ride height compared to genuine mm (F/R): -30/-20 Ride height adjustment range compared to genuine mm (F/R) Maximum (lower limit to upper limit): -62 to -2/-53 to +6 Ride height adjustment range compared to genuine mm (F/R) Recommended (lower limit to upper limit): -40 to -20/-30 to -10 Spring rate Kgf/mm (F/R): 5.0/5.0 Free length mm(F/R):200/260 Inner diameter mm(F/R):-/-
Remarks
Front damping force adjustment requires removal of the shock absorber. Since manual damping force adjustment is difficult, simultaneous installation of the EDFC series is recommended. The values ​​are calculated relative to the normal ride height. Recommended ride height adjustment range: These are values ​​confirmed by the manufacturer during installation. Precautions The ride height data is reference measurement data from the development vehicle, so there may be differences depending on individual vehicle differences and assembly conditions. (Also, there may be differences between the left and right sides, or the ride height may drop after some time due to settling after assembly.) Using outside the recommended ride height adjustment range may cause damage to the shock or vehicle and may result in non-compliance with safety standards. The manufacturer will not be held responsible for any damage in such cases. Depending on the wheel size, offset, tire brand and size, etc., interference may occur during driving even at the manufacturer's standard position. Set contents: Product + Shipping product
JAN/ISBN code: 4582202763854
Product code: VSTE0-C1AS3-qq-e-70k

Tags:

Toyota   Car   Honda Civic   Shock absorber   Car suspension   Toyota Prius   Coilover   TEIN   Ride height