The strong wedge shape line consisting of the body and large rear wing is truly a boomerang.
This is a reprint version of the Boomerang, which was introduced in 1986 as an entry-level 4WD racing buggy and quickly gained popularity.

The basic configuration remains the same, but each part has been fine-tuned, including equipping the gearbox with ball bearings and thrust ball bearings, and installing a new chassis cover to increase reliability in off-road driving.

The chassis, which uses shaft drive 4WD, is basically inherited from the drivetrain of the famous Hot Shot.
The high maintainability unique to the 3-division structure consisting of the front and rear gearboxes and bathtub frame is attractive.
Suspension is 4 wheel double wishbone

The front is equipped with a monoshock oil damper and stabilizer inherited from Hotshot, and the rear is equipped with two long CVA oil dampers.
This time, we added a chassis cover to further improve driving reliability.
You can also enjoy improved performance by incorporating the DF-02 universal shaft and DF-03 aluminum damper set.

[Separately required items (not included in this product)] EXPEC SP electric RC drive set, AA batteries for transmitter: 8 pieces Product introduction Intense vehicle consisting of a body and a large rear wing The wedge shape line is just like a boomerang.
This is a reprint version of the Boomerang, which was introduced in 1986 as an entry-level 4WD racing buggy and quickly gained popularity.
The basic configuration remains the same, but each part has been fine-tuned, including equipping the gearbox with ball bearings and thrust ball bearings, and installing a new chassis cover to increase reliability in off-road driving.
Total length: 385mm, total width: 234mm, total height: 153mm
Vehicle weight: Approximately 1160g (RC mechanism and battery not included)
Tread: F196mm R194mm
Tire width/diameter: F30/88mm R38/88mm
Frame: ABS resin bathtub
Drive method: Shaft drive 4WD
Differential gear: 3 bevels front and rear
Steering: 3-split tie rod type
Suspension: 4-wheel double wishbone
Gear ratio: 8.7:1 10.04:1
Motor: RS540 type
Speed controller: ESC specification (sold separately)
[Items to be purchased separately (not included in this product)] EXPEC SP electric RC drive set
AA batteries for transmitter: 8 pieces
*A power source is required to drive this product, but batteries, batteries, chargers, etc. are not included.
Also, transmitter, RC mechanism, etc. are not included.
Additional parts purchase, assembly, and painting are required before running.
*This product does not use fuel.
*This product does not include fuel.
*This product does not include paint, adhesive, oil, or grease.
Safety Warning Please drive in a wide and safe place such as a dedicated RC car circuit.
Never run it on the road
Do not run in crowded areas, parks, or near small children.
Do not run in small spaces or indoors.
Do not run in places where it may be a nuisance to others, such as schools, hospitals, or residences.
Do not run at night or early in the morning

Dimension: ‎39 x 24 x 16 cm


Tags:

Tamiya  Radio-controlled car  1/10 Scale  Tamiya 45057 RC Brushless ESC 02  Tamiya 1/10 Hotshot Re-Release Kit  Tamiya 1/10 The Boomerang  Tamiya 58418 RC Boomerang 4WD  fasteddy bearings Tamiya The Boomerang 58055 Sealed Bearing Kit  Tamiya RC 58418 1:10 2008 The Boomerang 4WD Off Road Buggy Model Assembly Kit  Tamiya Rc The Bigwig 2017 Kit 47330