[A brightly colored custom buggy packed with attention to detail] Graphic designer JUN WATANABE designed the Hot Shot II, which first appeared in 1987 as an improved version of Tamiya's first shaft-driven 4WD racing buggy, the Hot Shot. is a customized model of

The coloring has been renewed from the original version, which used black as the main color with yellow and orange stripes.
New design in brilliant blue with white stripes
In addition, the polycarbonate body and rear wing are painted in brilliant blue and pre-cut.

The original shape of the driver figure was too low, and the upper deck and roll cage are new parts.
In addition, the body guard, rear guard, and side plates were designed by JUN.

The chassis is a shaft drive 4WD that inherits the original Hot Shot II.
Equipped with differential gears in the front and rear closed gearboxes to demonstrate smooth maneuverability
Equipped with one front and two rear CVA dampers, the double wishbone 4-wheel independent suspension configuration remains the same, but the damper color has been changed from red to yellow.

Produce a metallic feeling by using plated parts for front and rear wheels and uprights.
A specially designed sticker is attached to the 540 motor to enhance the custom mood.
The tire is a hollow rubber low-profile type that mixes oval blocks and pin spikes with excellent grip.

Product introduction [Basic specifications] Total length: 390mm, total width: 235mm, total height: 150mm
Body weight: about 1285g
Tread: Front 205mm, Rear 200mm
Tire Width/Diameter: Front 31/88mm, Rear 38/88mm
Frame: ABS resin monocoque
Drive system: Shaft drive 4WD
Differential gear: 3 bevels front and rear
Steering: 2 split tie rod type
Suspension: 4-wheel double wishbone
Gear ratio: 8.70:1
Motor: RS540 type (with dedicated sticker)
Speed controller: ESC specification
[Items to be purchased separately (not included in this product)] Fine spec 2.4G electric RC drive set
AA batteries for transmitter: 4
* A power supply is required to drive this product, but batteries, batteries, chargers, etc. are not included.
Also, the transmitter, RC mechanism, etc. are not included.
It is necessary to purchase additional parts, assemble and paint before running.
*This product does not use fuel.
*Fuel is not included in this product.
*This product does not include paint, adhesive, oil, or grease.
Safety warning Please run in a wide and safe place such as a circuit dedicated to RC cars.
Never run on the road
Do not run in crowded places, parks, or near small children.
Do not run in narrow spaces or indoors
Do not run in places where other people may be disturbed, such as schools, hospitals, and residences.
Do not run at night or early in the morning

Dimensions : ‎39 x 24 x 15 cm


Tags:

Tamiya  Black  Radio-controlled car  Radio control  1/10 Scale  Buggy  車  Tamiya 1/10 RC Hotshot II Blockhead Motors TAM58710A  Tamiya 1/10 RC Wild One Off-Roader Buggy Blockhead Motors Kit  Tamiya 1/10 Hotshot Re-Release Kit  Off-road Buggy