Shipping and Returns
Europe, UK: Saturday, Jul 19 ~
USA: Thursday, Jul 17 ~
Australia: Saturday, Jul 19 ~
Asia: Friday, Jul 18 ~
UAE: Saturday, Jul 19 ~
Order within 6 Hours 19 mins with Scheduled Delivery. If you place an order within this time, We will ship Thursday, Jul 17 2025. This delivery time is calculated by DHL and FedEx. You can check the exact delivery date on checkout page.
USA: Thursday, Jul 17 ~
Australia: Saturday, Jul 19 ~
Asia: Friday, Jul 18 ~
UAE: Saturday, Jul 19 ~
Order within 6 Hours 19 mins with Scheduled Delivery. If you place an order within this time, We will ship Thursday, Jul 17 2025. This delivery time is calculated by DHL and FedEx. You can check the exact delivery date on checkout page.
Buyer Protection
Full refund if not genuine. Full or partial refund, if the new item is not as described.
Customer Reviews (0 rating)
No reviews on this item...
Description (4,691 characters)
Plastic model kit that requires assembly
Separate tool required
With multicolor molding, you can enjoy painting as you like.
Snap fit, no glue required
Target age: 15 years old and over Product introduction 1/12 scale snap-fit Super Cub The latest shape after minor changes can also be reproduced! The product is a kit format that requires assembly.
It is 1/12 scale
No painting required: Each part is colored with a molding color, and the body achieves a glossy texture that cannot be obtained by painting.
No need for gluing: Designed to fit parts together for easy assembly
The product is based on the current Super Cub C110, which was launched in 2018.
It is possible to select/manufacture two types of brake lamps, the initial type and the brake lamp that corresponds to the legal revision in May 2020.
Accurately reproduces the large number of moving parts unique to 1/12 scale and fine modeling.
The body uses a special molded material to reproduce a level of gloss that is difficult to express with paint.
There are 9 molding colors: beige, brown, gloss silver, silver, black, ivory, clear red, clear orange, and clear.
Even with a straight assembly, it looks like it is painted separately with colored parts, and even when painting, the parts are divided to greatly reduce masking work.
・The leg shield is integrally molded and designed to be easily press-fitted into the body.
・The front fender is integrated with parts while accurately reproducing the molding with a slide mold.
・The side covers are separate parts from the body, and the complex shape composed of curves and straight lines is precisely three-dimensionalized.
-The handle is shaped to be sandwiched between the body, and the left and right grip switches are well-shaped.
- The meter panel is represented by the attached sticker, and the panel cover is fitted with special clear parts for a realistic finish.
・In order to create the atmosphere of a real car as much as possible, the mirror is designed with an ultra-fine injection design.
-The brake lever, which is a different color than the handle, is reproduced with a different part and an accurate shape.
- Headlight lenses are made of clear parts, and the internal shape is also expressed with delicate sculptures.
・The engine is divided into three parts, left, right and front, to express the external shape three-dimensionally.
・The change pedal is a one-piece part that accurately reproduces the bar cross section and pedal shape.
-The muffler has a 3-piece structure that reproduces both the exhaust port and the conical shape.
-The hook inside the leg shield, which is also a feature of the Super Cub, can be easily expressed with a sticker or with an adhesive bonus part.
・The stand is a separate part and is movable.
It is also possible to park the bicycle
・The side stand is movable after being made into a separate part.
Can be parked by tilting the body
・The seat has a two-piece structure that is divided in the same part as the color tone, and it is a movable type that can be flipped up.
・Reproduces the fuel filler port flat when the seat is opened.
・The name decals on both sides of the fuel tank are wheel seals with a metallic feel.
・The rear carrier uses a slide mold and is an integral part.
・You can choose from two types of brake lights: a horizontal type after the 2020 revision of the law, and a vertical type from the time of launch.
・The rear seat of the actual vehicle option parts is recorded as a bonus part.
You can choose to wear
-The hub in the center of the wheel is a one-piece part that reproduces the surrounding shape with a slide mold.
・The tires are made of rubber and are specially used for this product.
Accurately reproduce the front and rear width difference
The size when completed is (approx.) Length 155 x Width 58 x Height 87 mm
78 assembly parts [Attached contents] ・Runner x15 ・Rubber tire x2 ・Assembly manual x1 ・Seal x1 *This product is made in Japan.
*This product is a plastic model kit that requires assembly.
No safety warning
Dimensions : 33 x 21 x 7 cm
Separate tool required
With multicolor molding, you can enjoy painting as you like.
Snap fit, no glue required
Target age: 15 years old and over Product introduction 1/12 scale snap-fit Super Cub The latest shape after minor changes can also be reproduced! The product is a kit format that requires assembly.
It is 1/12 scale
No painting required: Each part is colored with a molding color, and the body achieves a glossy texture that cannot be obtained by painting.
No need for gluing: Designed to fit parts together for easy assembly
The product is based on the current Super Cub C110, which was launched in 2018.
It is possible to select/manufacture two types of brake lamps, the initial type and the brake lamp that corresponds to the legal revision in May 2020.
Accurately reproduces the large number of moving parts unique to 1/12 scale and fine modeling.
The body uses a special molded material to reproduce a level of gloss that is difficult to express with paint.
There are 9 molding colors: beige, brown, gloss silver, silver, black, ivory, clear red, clear orange, and clear.
Even with a straight assembly, it looks like it is painted separately with colored parts, and even when painting, the parts are divided to greatly reduce masking work.
・The leg shield is integrally molded and designed to be easily press-fitted into the body.
・The front fender is integrated with parts while accurately reproducing the molding with a slide mold.
・The side covers are separate parts from the body, and the complex shape composed of curves and straight lines is precisely three-dimensionalized.
-The handle is shaped to be sandwiched between the body, and the left and right grip switches are well-shaped.
- The meter panel is represented by the attached sticker, and the panel cover is fitted with special clear parts for a realistic finish.
・In order to create the atmosphere of a real car as much as possible, the mirror is designed with an ultra-fine injection design.
-The brake lever, which is a different color than the handle, is reproduced with a different part and an accurate shape.
- Headlight lenses are made of clear parts, and the internal shape is also expressed with delicate sculptures.
・The engine is divided into three parts, left, right and front, to express the external shape three-dimensionally.
・The change pedal is a one-piece part that accurately reproduces the bar cross section and pedal shape.
-The muffler has a 3-piece structure that reproduces both the exhaust port and the conical shape.
-The hook inside the leg shield, which is also a feature of the Super Cub, can be easily expressed with a sticker or with an adhesive bonus part.
・The stand is a separate part and is movable.
It is also possible to park the bicycle
・The side stand is movable after being made into a separate part.
Can be parked by tilting the body
・The seat has a two-piece structure that is divided in the same part as the color tone, and it is a movable type that can be flipped up.
・Reproduces the fuel filler port flat when the seat is opened.
・The name decals on both sides of the fuel tank are wheel seals with a metallic feel.
・The rear carrier uses a slide mold and is an integral part.
・You can choose from two types of brake lights: a horizontal type after the 2020 revision of the law, and a vertical type from the time of launch.
・The rear seat of the actual vehicle option parts is recorded as a bonus part.
You can choose to wear
-The hub in the center of the wheel is a one-piece part that reproduces the surrounding shape with a slide mold.
・The tires are made of rubber and are specially used for this product.
Accurately reproduce the front and rear width difference
The size when completed is (approx.) Length 155 x Width 58 x Height 87 mm
78 assembly parts [Attached contents] ・Runner x15 ・Rubber tire x2 ・Assembly manual x1 ・Seal x1 *This product is made in Japan.
*This product is a plastic model kit that requires assembly.
No safety warning
Dimensions : 33 x 21 x 7 cm