Fujimi model 1/24 car NEXT series No.1 EX-2 VELLFIRE ZA G EDITION (uncolored (non-color) version) car NX-1 EX-2 - Discovery Japan Mall Skip to search
Bestsellers     New arrivals     34,498 Items

Delivery by DHL, Fedex
Europe, UK ,Rissian Federation : Thursday, Oct 6
United Status : Tuesday, Oct 4
Australia : Thursday, Oct 6
Asia : Tuesday, Oct 4
UAE : Wednesday, Oct 5

Order within 0 Hours 38 mins with Scheduled Delivery. If you place an order within this time, We will ship on Monday, Oct 3 2022. This delivery time is calculated by DHL & Fedex. You can check the exact delivery date on checkout page.

Buyer Protection

Full refund if not genuine. Full or partial refund, if the new item is not as described.

Write a review!

No review on this item...

     Description (4,239 characters)
Plastic model kit that requires assembly
Separate tool required

Snap fit, no glue required

Product introduction 30 series Z face Vellfire appeared with special specifications for painters! The product is a kit format that requires assembly and painting.
It is 1/24 scale
Painting: Unlike the pre-colored parts so far, it is composed of molded parts with a white base like the conventional kit, increasing the degree of freedom in painting expression. I am
In 2015, the second generation VELLFIRE 30 series appeared after a full model change with its sister car Alphard.
It is a model that has gained popularity as a luxury minivan, and is available in white, black, and gray and blue metallic colors.
It has a distinctive appearance that uses a lot of plating, and has improved power performance and preventive safety technology compared to the previous model, making it a unique model both inside and out.
The main parts are set with white molding for users who assume a paint finish.
Specifications to reproduce markings and numbers with attached decals
The plated parts of the actual car are not plated with resin due to the premise of using commercially available plated paint.
Of the PS materials, it is the same as the material (normal paint kit) that is softer than the color specification.
The product is based on the 2nd generation 30 series early model with the motif of the 3.5 liter model ZAG edition grade.
Commonly known as "Z face", it is a vehicle with a characteristic shape with a dumbbell design on the front grille.
Accurately reproduces fine unevenness and body modeling due to the size unique to 1/24 scale.
The body is a specification in which some panels are fitted into the integrally molded basic parts.
The panel line concave engraving on the integrated part is deep enough to consider painting
The characteristic front mask and plating finish are all separate parts, eliminating the need for basic masking work.
The black finish of the license plate mounting bumper and left and right grills are individual parts.
Transparent parts are set on the fog light lens surface for realistic modeling.
The front grille has a multi-layered structure that reproduces the depth by assembling parts in layers.
The interior has a minimum number of parts such as a bathtub-shaped integral molded part, the back of the seat, and instrument panel parts, and the maximum modeling expression.
The window parts are divided into front/side/roof/rear, and the molding color of each window is transparent.
The black part around the window includes a full-size pattern paper that assists the painting mask in the manual.
The rear bumper is a special part with a vertical reflector unique to the Z face, and is separate from the body.
The rear plated garnish is a separate part that is easy to paint and is fixed by press-fitting, so there is no need to worry about stains such as adhesive sticking out.
The brake lamp accurately reproduces the characteristics of the 30 series early model, which is a horizontal row of dots.
The reflective surface (inside) of the rear lights is a style that is attached to the vehicle body after painting.
Included decals include license plate, markings, meter panel, and car navigation monitor.
A total of three types of meter panels are available: two for gasoline vehicles and one for hybrids.
Includes bonus blue logo marks and markings for hybrids
The size when completed is about "length 21 x width 10 x height 8 cm"
115 assembly parts [Attached contents] ・Runner x19 ・Rubber tire x4 ・Assembly manual x1 ・Decal x1 *This product is made in Japan.
*This product is a plastic model kit that requires assembly.
No safety warning
Dimensions : ‎35 x 21 x 8 cm


Tags:

FUJIMI  Toyota  Car  Fujimi Mokei  Minivan  TOYOTA VELLFIRE  車・トラック  Toyota Wish  Vellfire ZA G EDITION Special Specification  Car Next Suzuki Hustler  


Products Similar to 'FUJIMI'

Fujimi model 1/24 car NEXT ser... 4968728066271 Plastic model kit that requires assembly
Separate tool required

Snap fit, no glue required

Product introduction 30 series Z face Vellfire appeared with special specifications for painters! The product is a kit format that requires assembly and painting.
It is 1/24 scale
Painting: Unlike the pre-colored parts so far, it is composed of molded parts with a white base like the conventional kit, increasing the degree of freedom in painting expression. I am
In 2015, the second generation VELLFIRE 30 series appeared after a full model change with its sister car Alphard.
It is a model that has gained popularity as a luxury minivan, and is available in white, black, and gray and blue metallic colors.
It has a distinctive appearance that uses a lot of plating, and has improved power performance and preventive safety technology compared to the previous model, making it a unique model both inside and out.
The main parts are set with white molding for users who assume a paint finish.
Specifications to reproduce markings and numbers with attached decals
The plated parts of the actual car are not plated with resin due to the premise of using commercially available plated paint.
Of the PS materials, it is the same as the material (normal paint kit) that is softer than the color specification.
The product is based on the 2nd generation 30 series early model with the motif of the 3.5 liter model ZAG edition grade.
Commonly known as "Z face", it is a vehicle with a characteristic shape with a dumbbell design on the front grille.
Accurately reproduces fine unevenness and body modeling due to the size unique to 1/24 scale.
The body is a specification in which some panels are fitted into the integrally molded basic parts.
The panel line concave engraving on the integrated part is deep enough to consider painting
The characteristic front mask and plating finish are all separate parts, eliminating the need for basic masking work.
The black finish of the license plate mounting bumper and left and right grills are individual parts.
Transparent parts are set on the fog light lens surface for realistic modeling.
The front grille has a multi-layered structure that reproduces the depth by assembling parts in layers.
The interior has a minimum number of parts such as a bathtub-shaped integral molded part, the back of the seat, and instrument panel parts, and the maximum modeling expression.
The window parts are divided into front/side/roof/rear, and the molding color of each window is transparent.
The black part around the window includes a full-size pattern paper that assists the painting mask in the manual.
The rear bumper is a special part with a vertical reflector unique to the Z face, and is separate from the body.
The rear plated garnish is a separate part that is easy to paint and is fixed by press-fitting, so there is no need to worry about stains such as adhesive sticking out.
The brake lamp accurately reproduces the characteristics of the 30 series early model, which is a horizontal row of dots.
The reflective surface (inside) of the rear lights is a style that is attached to the vehicle body after painting.
Included decals include license plate, markings, meter panel, and car navigation monitor.
A total of three types of meter panels are available: two for gasoline vehicles and one for hybrids.
Includes bonus blue logo marks and markings for hybrids
The size when completed is about "length 21 x width 10 x height 8 cm"
115 assembly parts [Attached contents] ・Runner x19 ・Rubber tire x4 ・Assembly manual x1 ・Decal x1 *This product is made in Japan.
*This product is a plastic model kit that requires assembly.
No safety warning
Dimensions : ‎35 x 21 x 8 cm
65639
4968728066271 In Stock