Plastic model kit that needs to be assembled
Separate tools are required

With multicolor molding, you can enjoy painting etc. to your liking

Snap fit, no glue required

Product introduction No painting required: Each part is colored with a molding color, and some parts are colored together with the sticker.
No need to glue: The design specifications that fit the parts together make it easy to assemble.
Destroyer Shimakaze is the fastest destroyer of the Japanese Navy and the only ship without a ship of the same type.
Showa 14 plan, completed in May 1941 in the middle of the war
It is a large destroyer with a total length of over 120 meters and a displacement of 2,500 tons.
Equipped with 3 12.7 cm twin guns and 3 61 cm 5 twin torpedo launchers, it had excellent equipment for running.
He was active mainly in the central Pacific Ocean, including the Kiss or Island withdrawal operation in July 1943, participated in the Battle of Leyte Gulf in October 1945, and was attacked by a U.S. aircraft in the Ormoc transport operation the following month and died.

-When the product is completed in May 1943, it is possible to reproduce the appearance of adding machine guns and not equipped with No. 13 electric probe.

・ Etching parts that can express details that are difficult to reproduce with injection parts are included.

・ The pedestal for the exhibition comes with parts different from the normal version of the wooden deck / strip processing pattern.

・ It can be made with the modeling expression unique to 1/350 large scale.
-Parts of the hull and bottom are divided by water lines
Both full hull type and offshore type can be recreated
-Parts are divided and colored according to the main color tones.
・ Gray consists of a total of 6 parts colors, including a slightly lighter gray that imitates the Maizuru arsenal color, a linoleum color, and a ship bottom color.
・ The hull is split into left and right
Specifications to fit by boss press fitting
・ Represents the parts that cannot be reproduced by 1/700 including the porthole presser, the thickness of the steel plate, the porthole and the eaves.
・ The bottom of the ship is integrally molded
Surface texture with a sense of precision that reproduces the thickness and overlap of steel sheets
-Reproduced with delicate engraving such as water supply / drainage port at the bottom, hearing device, rivet of keel, etc.
-The main gun has a one-piece structure while molding the entire circumference of the turret by using a slide mold.
-The barrel has a structure that allows you to raise and lower one gate at a time even after assembly, and the muzzle is expressed in an open shape by a slide mold.
-The bottom surface, which cannot be seen after assembly, has been carefully reproduced in detail, such as the modeling of the reinforcing girder.
-The 5-unit torpedo launcher, which is also a feature of Shimakaze, is precisely reproduced with 3 parts: cover, torpedo tube, and torpedo.
・ After assembly, it can be oriented and swiveled to the left and right.
・ The bridge is an integrally molded part while being shaped and engraved all around the side wall by using a slide mold.
-The type 94 directional board at the top of the bridge can be turned even after assembly, and the directivity direction with the main gun can be adjusted.
・ Clear molded special parts are available for the bridge window.
・ The shelter part at the base of the mast is also an integrally molded part with a slide mold like the bridge.
-The mast has a two-piece structure with front legs and two rear legs, and the lookout stand and No. 22 electric probe are accurately reproduced.
-The chimney is a left and right bonded type, and the funnel cap is in a net-like state, so it is finished in a realistic shape.
-The funnel cap and the black paint on the top of the chimney are reproduced in advance by coloring the parts.
・ The steam pipe and the chimney for cooking are made into separate parts from the chimney for the engine to create a three-dimensional shape.
・ For the linoleum part of the front and rear upper decks, brown molded colored parts are available.
・ The linoleum holder is expressed with delicate engraving.
-The steel deck in the center of the upper deck reproduces the non-slip (strip) pattern in detail with convex engraving.
-The base of the No. 2 turret is an integrated part with a slide mold, and engraving is applied to both the side and top surfaces.
・ Parts dedicated to the specifications at the time of completion, which were only equipped with a depth charge projector, are available on the stern.
-Comes with a pre-cut sticker that expresses the coloring of the warship flag and the inner surface of the cutter
Molded parts are composed of 6 colors: Maizuru arsenal color, ship bottom color, linoleum color, black, transparent color, and gold color.
[Attachments]
・ Runner x33
・ Assembly manual x2
・ Etching parts x5
・ Metal parts x20
・ Paper sticker x1 * This product is made in Japan
* This product is a plastic model kit that requires assembly.
No safety warning
Dimension: 41 x 15 x 8 cm


Tags:

FUJIMI  Plastic model  Scale model  Fujimi Mokei  1:700 scale  Military miniaturism  エッチングパーツ  Fujimi model 1/700 ship NEXT series No.01 Japanese Navy battleship Yamato  Fujimi FUNE NEXT IJN Destroyer Shimakaze 1/350 scale kit  Fujimi 1/350 Ship IJN