Shipping and Returns
Europe, UK: Friday, Mar 28
USA: Tuesday, Mar 25
Australia: Thursday, Mar 27
Asia: Wednesday, Mar 26
UAE: Thursday, Mar 27
Order within 14 Hours 21 mins with Scheduled Delivery. If you place an order within this time, We will ship on Monday, Mar 24 2025. This delivery time is calculated by DHL & Fedex. You can check the exact delivery date on checkout page.
USA: Tuesday, Mar 25
Australia: Thursday, Mar 27
Asia: Wednesday, Mar 26
UAE: Thursday, Mar 27
Order within 14 Hours 21 mins with Scheduled Delivery. If you place an order within this time, We will ship on Monday, Mar 24 2025. This delivery time is calculated by DHL & Fedex. You can check the exact delivery date on checkout page.
Buyer Protection
Full refund if not genuine. Full or partial refund, if the new item is not as described.
Customer Reviews (0 rating)
No reviews on this item...
Description (2,833 characters)
Assembling is an inset type that does not require adhesive
Separate tools are required to install the parts
Completed size: Overall length 156mm, Overall width 97mm, Overall height 36mm
Gear ratio set to 4: 1 with double shaft motor
The body is divided into three parts: front cowl, rear cowl, and canopy. The canopy can be attached and detached, so you can enjoy open and closed body shapes.
* Batteries are not included in this kit
Two AA batteries are required separately for running
Product introduction [Attention is paid to the new concept body divided into three] This is a plastic model assembly kit for a four-wheel drive racer that has high performance and is fun to race. DCR-01 (Decross-01) is a mini 4WD PRO that adopts a new concept. Machine. The deep pearl red body is handled by Kayuki Yamazaki, who worked on the RC buggy "Dual Ridge". The front cowl, rear cowl, and canopy have long canopies in the front and rear, and the body is full of futuristic mood with reduced height. The canopy can be attached and detached so you can enjoy open and closed body shapes. In addition, you can easily color coordinate by combining optional body sets with different colors. The sticker is set in metal tone. [ MA chassis pursuing drive efficiency] MA is an abbreviation for Midship AERO. The "MS chassis"
with a midship layout equipped with a double shaft motor in the center of the car body, paying particular attention to the airflow (aero) during driving "AR chassis"
designed in. The "MA chassis"
is a collection of the excellent features of each in one chassis. The chassis body and A parts are all in white to enhance the vivid body color. , A large-diameter low-height tire is attached to a silver 6-spoke wheel with the spokes finished as thin as possible. Of course, using the racing know-how accumulated so far, 6 low-friction resin rollers and rear skid bar The running performance has been thoroughly refined, such as by equipping it as standard equipment. In addition, the adoption of an integrated monocock structure further improves ease of assembly and maintainability, making it smaller for beginners to veteran racers. It is a chassis that can be used for a wide range of purposes, from street races held on the course to official competitions on large special 5-lane circuits. Gear ratio is set to 4: 1. [Basic specifications]
・ Overall length 156mm when completed
・ Overall width 97mm
・ Overall height 36mm
・ With double shaft motor
-Assembly is an inset type that does not require adhesive [Items to be purchased separately]
・ 2 AA batteries Safety warning Not applicable
Dimension: 15.6 x 9.7 x 3.6 cm
Separate tools are required to install the parts
Completed size: Overall length 156mm, Overall width 97mm, Overall height 36mm
Gear ratio set to 4: 1 with double shaft motor
The body is divided into three parts: front cowl, rear cowl, and canopy. The canopy can be attached and detached, so you can enjoy open and closed body shapes.
* Batteries are not included in this kit
Two AA batteries are required separately for running
Product introduction [Attention is paid to the new concept body divided into three] This is a plastic model assembly kit for a four-wheel drive racer that has high performance and is fun to race. DCR-01 (Decross-01) is a mini 4WD PRO that adopts a new concept. Machine. The deep pearl red body is handled by Kayuki Yamazaki, who worked on the RC buggy "Dual Ridge". The front cowl, rear cowl, and canopy have long canopies in the front and rear, and the body is full of futuristic mood with reduced height. The canopy can be attached and detached so you can enjoy open and closed body shapes. In addition, you can easily color coordinate by combining optional body sets with different colors. The sticker is set in metal tone. [ MA chassis pursuing drive efficiency] MA is an abbreviation for Midship AERO. The "MS chassis"
with a midship layout equipped with a double shaft motor in the center of the car body, paying particular attention to the airflow (aero) during driving "AR chassis"
designed in. The "MA chassis"
is a collection of the excellent features of each in one chassis. The chassis body and A parts are all in white to enhance the vivid body color. , A large-diameter low-height tire is attached to a silver 6-spoke wheel with the spokes finished as thin as possible. Of course, using the racing know-how accumulated so far, 6 low-friction resin rollers and rear skid bar The running performance has been thoroughly refined, such as by equipping it as standard equipment. In addition, the adoption of an integrated monocock structure further improves ease of assembly and maintainability, making it smaller for beginners to veteran racers. It is a chassis that can be used for a wide range of purposes, from street races held on the course to official competitions on large special 5-lane circuits. Gear ratio is set to 4: 1. [Basic specifications]
・ Overall length 156mm when completed
・ Overall width 97mm
・ Overall height 36mm
・ With double shaft motor
-Assembly is an inset type that does not require adhesive [Items to be purchased separately]
・ 2 AA batteries Safety warning Not applicable
Dimension: 15.6 x 9.7 x 3.6 cm
